change

Special Feature Requests | Stockpile Compaction

Stockpile Compaction

Take no risks

Dressta crawler dozers are renowned for their superior balance and stability on coal slopes, making them the ideal choice for stockpile compaction applications.

TD-20M

TD-20M

TD-20M

TD-20M

TD-20M

TD-20M

With the Stockpile Compaction Equipment Special Feature Request (SFR), our dozers are geared for optimal performance on the slopes.

Stockpile Compaction Equipment

The Stockpile Compaction Equipment SFR features the robust Dressta steel drum and winch line attachment. Brackets attach the drum to a winch line that is fitted with a tensioning system to prevent the line contacting the slope face at any time. It is also equipped with a system to ensure precision line guidance, as well as a cleaning system to remove coal contamination from the components.

Compaction Equipment Specifications:
Smooth Drum

  • Diameter: 1100mm
  • Length: 2000mm
  • Weight: 5000kg/11,023lbs

Winch

  • Line pull: 83 – 1,334kN
  • Max. Line Speed: 50-60m/min
  • Max. Pressure: 25MPa
  • Line Diameter: 20mm
  • Line Length: 70m

Reliable Drum Support System

A reliable drum support system means there is no need to remove the compaction equipment to use the machine as a standard crawler dozer. This drum supporting system is built to prevent drum detachment or swinging during transportation.

Performance on the Slopes

Dressta crawler dozers are proficient on the slopes of coal piles, spreading their weight across the sturdy undercarriage for superior balance and stability. With the compaction equipment installed, our dozers can operate on lengthwise slopes of 25° and crosswise slopes of 20°.

 

UNITS:

Available Models

Optimal power to weight ratio for unrivalled traction & drawbar pull…

The TD-40R Extra sets the standards for others to follow and is a result of DRESSTA’s experience in designing highly efficient and productive Crawler Dozers.

Design concepts utilised in the TD-40R Extra include, optimisation of weight distribution, modular construction, and use of a one-piece main frame, two-speed Steering Drive and a 3-point track mounting system. Optimal performance is achieved when machine weight is matched to power and the TD-40R Extra provides a second-to-none balance of weight for traction and power for unrivalled drawbar pull.

 

Key Specifications

Driveline
Engine Manufacturer / Model / TierPerkins/C 18/T4F
Displacement18.00 l1,098.4 in3
Rated Speed2000 RPM
Engine Output - Net394 kW528 hp
Rated Speed - Torque1500 RPM
Engine Torque2379 Nm1,754.7 lb/ft
Transmission Type - Fwd Rev SpeedsPowershift - 6/6
Carrier Rollers / Track Rollers2/6
Shoe Pitch280 mm11.0 in
Track Shoe Width610 mm24.0 in
Ground Contact Area44000 cm26,820.0 in2
Number of Shoes39
Capacities
Fuel Tank1362 l359.8 Gal(US)
Hydraulic Tank169 l44.6 Gal(US)
Blade Capacity18.60 m324.3 yd3
Dimensions
Height Top of ROPS (Max)4220 mm166.1 in
Width - Over Tracks3110 mm122.4 in
Track Length - On Ground3610 mm142.1 in
Blade Width4810 mm189.4 in
Performance
Speed Forward - Maximum12.00 km/h7.5 MPH
Speed Reverse - Maximum14.90 km/h9.3 MPH
Ground Bearing Pressure151.00 kPa21.9 psi
Drawbar Pull Maximum1162 kN261.2 lbf
Implement Pump Flow398.00 l/min14.1 cfm
Operating Weight
Operating Weight67700 kg149,252.8 lb

Features & Benefits

WORKING EQUIPMENT
Blades

  • Standard Semi-U Blade design combines the penetration ability of a straight blade with the increased capacity provided by short wings. It is used for heavy duty applications such as mining and road construction.
  • The Full-U Blade provides high volume movement of light non-cohesive materials such as coal and woodchips.
  • Coal Blade for excellent coal pile productivity. Its length, height, and wing angles were developed specifically for high production coal dozing. The blade pocket is in the right place to deliver a live, rolling load. Extended end plates help contain loads and eliminate side spillage.
BLADE SELECTION SEMI-U FULL-U COAL
UNDERCARRIAGE STD STD STD
BLADE CAPACITY
SAE J1265
18.6 m3
(24.3 yd3)
22.8 m3
(29.8 yd3)
39.8 m3
(52.0 yd3)

Rippers
Adjustable parallelogram multi-shank ripper offers excellent 1000 mm (39”) penetration in extremely tough materials and can be used with up to 3 shanks adjusted to two vertical positions. The single shank ripper option offers a standard shank with 1290 mm (51”) penetration and a deep shank option with an exceptional 1670 mm (66”) penetration, allowing full use of the remarkable drawbar pull of the machine.


ENGINE
The TD-40R Extra is powered by a diesel engine that delivers outstanding power & torque;

  • Heavy Duty Perkins C 18 litre Tier 4 Final /EU Stage IV Diesel Engine.
  • Direct injection, in-line, 6 cylinder, 4 stroke, turbocharged & Charge Air Cooled (CAC) engine developing 394 kW (536 hp) Net at rated engine speed of 2000 rpm


TRANSMISSION
Transmission system that automatically matches speed to load conditions for optimal push power, preventing driveline shock, multiplying the torque required while delivering 6 forward and 6 reverse speeds.

  • Torque Converter
  • 3-Speed Powershift Transmission
  • 2-Speed Steering Drive
  • Double reduction Final Drive

The modular design drivetrain incorporates the engine, torque converter, transmission, steering drive and final drives. Components can be easily removed & re-fitted without oil loss ensuring maximum machine uptime.


HYDRAULICS
A proven design multiple pump system & high capacity hydraulic reservoir for improved cooling. Hose & tube routings are accessible and yet well protected to prevent accidental damage. Trimble ready option is available on factory build orders.

Two-speed steering module on Dressta dozers maintains power to both tracks – at all times. You get the benefit of vastly improved traction to push loads effortlessly through turns, quickly and smoothly.


CAB - OPERATOR STATION & CONTROLS
Deluxe 6-sided ROPS / FOPS Cab with enlarged glass area provides a clear and direct line of sight to both the blade and ripper. The comfortable, sound-suppressed, pressurised cab is equipped with:

  • Efficient air recirculation system
  • Air conditioner & heater with multiple vents
  • Deluxe air suspension seat with adjustable arm rests. The seat swivels 14 degrees to the right for better ripper viewing
  • Ergonomically designed joystick controls for direction, blade and ripper operations.


ROBUST FRAME AND UNDERCARRIAGE
DRESSTA Mainframe and Track frame system ensures excellent machine balance for dozing, ripping, or final grading applications.

  • Mainframe – a one-piece weldment consisting of the front frame, rear frame, and equaliser bar. The rugged design of the mainframe absorbs impact shock loads and twisting forces to ensure a long life.
  • High quality sealed and lifetime lubricated track rollers
  • Heavy-duty idlers and track tensioners

Tracks – High quality durable tracks for tough working conditions;

  • Track Chain - Links made of drop forged steel alloy and strutted to resist twisting and working stresses.
  • Track Shoes - Wide range of track shoe widths helps to match TD-40R Extra perfectly to all types of ground conditions.
  • Dressta Lubricated Track System (LTS)

Track Chain Guides and Track Roller Guards – Track chain guides are standard equipment and full length track roller guards are optional.

Suspension System – 3-point suspension system consisting of two pivot shafts and equaliser bar.

Optimal power to weight ratio for unrivalled traction & drawbar pull…

The TD-25R sets the standards for others to follow and is a result of DRESSTA’s experience in designing highly efficient and productive Crawler Dozers.

Design concepts utilised in the TD-25R include, optimisation of weight distribution, modular construction, and use of a one-piece main frame, two-speed Steering Drive and a 3-point track mounting system. Optimal performance is achieved when machine weight is matched to power and the TD-25R provides a second-to-none balance of weight for traction and power for unrivalled drawbar pull.

 

Key Specifications

Driveline
Engine Manufacturer / Model / TierCummins/QSX 15/T4I
Displacement15.00 l915.4 in3
Rated Speed2000 RPM
Engine Output - Net280 kW375 hp
Rated Speed - Torque1400 RPM
Engine Torque1993 Nm1,470.0 lb/ft
Transmission Type - Fwd Rev SpeedsPowershift - 6/6
Carrier Rollers / Track Rollers2/6
Shoe Pitch250 mm9.8 in
Track Shoe Width560 mm22.0 in
Ground Contact Area36600 cm25,673.0 in2
Number of Shoes39
Capacities
Fuel Tank825 l217.9 Gal(US)
Hydraulic Tank130 l34.3 Gal(US)
Blade Capacity9.60 m312.6 yd3
Dimensions
Height Top of ROPS (Max)3800 mm149.6 in
Width - Over Tracks2700 mm106.3 in
Track Length - On Ground3270 mm128.7 in
Blade Width4050 mm159.4 in
Performance
Speed Forward - Maximum10.30 km/h6.4 MPH
Speed Reverse - Maximum12.20 km/h7.6 MPH
Ground Bearing Pressure116.00 kPa16.8 psi
Drawbar Pull Maximum793 kN178.3 lbf
Implement Pump Flow313.50 l/min11.1 cfm
Operating Weight
Operating Weight41150 kg90,720.1 lb

Features & Benefits

WORKING EQUIPMENT
Blades

  • Standard Semi-U Blade design combines the penetration ability of a straight blade with the increased capacity provided by short wings. It is used for heavy duty applications such as mining and road construction.
  • The Full-U Blade provides high volume movement of light non-cohesive materials such as coal and woodchips.
  • Coal Blade for excellent coal pile productivity. Its length, height, and wing angles were developed specifically for high production coal dozing. The blade pocket is in the right place to deliver a live, rolling load. Extended end plates help contain loads and eliminate side spillage.
BLADE SELECTION SEMI-U FULL-U ANGLE COAL
UNDERCARRIAGE STD STD STD STD
BLADE CAPACITY
SAE J1265
9.6 m3
(12.5 yd3)
11.5 m3
(15.0 yd3)
5.7 m3
(7.4 yd3)
21.0 m3
(27.5 yd3)

Rippers
Adjustable parallelogram multi-shank ripper offers excellent 868 mm (34.2”) penetration in extremely tough materials and can be used with up to 3 shanks adjusted to two vertical positions. The single shank ripper option offers a standard shank with 1250 mm (49.2”) penetration and a deep shank option with an exceptional 1700 mm (66.9”) penetration, allowing full use of the remarkable drawbar pull of the machine.


ENGINE
The TD-25R is powered by a diesel engine that delivers outstanding power & torque;

  • Heavy Duty Cummins QSX 15 litre Tier 4 Interim/EU Stage IIIB Diesel Engine.
  • Direct injection, in-line, 6 cylinder, 4 stroke, turbocharged & Charge Air Cooled (CAC) engine developing 280 kW (375 hp) Net at rated engine speed of 2000 rpm


TRANSMISSION
Transmission system that automatically matches speed to load conditions for optimal push power, preventing driveline shock, multiplying the torque required while delivering 6 forward and 6 reverse speeds.

  • Torque Converter
  • 3-Speed Powershift Transmission
  • 2-Speed Steering Drive
  • Double reduction Final Drive

The modular design drivetrain incorporates the engine, torque converter, transmission, steering drive and final drives. Components can be easily removed & re-fitted without oil loss ensuring maximum machine uptime.


HYDRAULICS
A proven design multiple pump system & high capacity hydraulic reservoir for improved cooling. Hose & tube routings are accessible and yet well protected to prevent accidental damage. Trimble ready option is available on factory build orders.

Two-speed steering module on Dressta dozers maintains power to both tracks – at all times. You get the benefit of vastly improved traction to push loads effortlessly through turns, quickly and smoothly.


CAB - OPERATOR STATION & CONTROLS
Deluxe 6-sided ROPS / FOPS Cab with enlarged glass area provides a clear and direct line of sight to both the blade and ripper. The comfortable, sound-suppressed, pressurised cab is equipped with:

  • Efficient air recirculation system
  • Air conditioner & heater with multiple vents
  • Deluxe air suspension seat with adjustable arm rests. The seat swivels 14 degrees to the right for better ripper viewing
  • Ergonomically designed joystick controls for direction, blade and ripper operations.

ROBUST FRAME AND UNDERCARRIAGE
DRESSTA Mainframe and Track frame system ensures excellent machine balance for dozing, ripping, or final grading applications.

  • Mainframe – a one-piece weldment consisting of the front frame, rear frame, and equaliser bar. The rugged design of the mainframe absorbs impact shock loads and twisting forces to ensure a long life.
  • High quality sealed and lifetime lubricated track rollers
  • Heavy-duty idlers and track tensioners

Tracks – High quality durable tracks for tough working conditions;

  • Track Chain - Links made of drop forged steel alloy and strutted to resist twisting and working stresses.
  • Track Shoes - Wide range of track shoe widths helps to match TD-25R perfectly to all types of ground conditions.
  • Dressta Lubricated Track System (LTS)

Track Chain Guides and Track Roller Guards – Track chain guides are standard equipment and full length track roller guards are optional.

Suspension System – 3-point suspension system consisting of two pivot shafts and equaliser bar.

Optimal power to weight ratio for unrivalled traction & drawbar pull…

The TD-25R Extra sets the standards for others to follow and is a result of DRESSTA’s experience in designing highly efficient and productive Crawler Dozers.

Design concepts utilised in the TD-25R Extra include, optimisation of weight distribution, modular construction, and use of a one-piece main frame, two-speed Steering Drive and a 3-point track mounting system. Optimal performance is achieved when machine weight is matched to power and the TD-25R Extra provides a second-to-none balance of weight for traction and power for unrivalled drawbar pull.

 

Key Specifications

Driveline
Engine Manufacturer / Model / TierCummins/QSX 15/T4F
Displacement15.00 l915.4 in3
Rated Speed2000 RPM
Engine Output - Net280 kW375 hp
Rated Speed - Torque1200 RPM
Engine Torque1993 Nm1,470.0 lb/ft
Transmission Type - Fwd Rev SpeedsPowershift - 6/6
Carrier Rollers / Track Rollers2/6
Shoe Pitch250 mm9.8 in
Track Shoe Width560 mm22.0 in
Ground Contact Area36600 cm25,673.0 in2
Number of Shoes39
Capacities
Fuel Tank770 l203.4 Gal(US)
Hydraulic Tank130 l34.3 Gal(US)
Blade Capacity9.60 m312.6 yd3
Dimensions
Height Top of ROPS (Max)3800 mm149.6 in
Ground Clearance575 mm22.6 in
Width - Over Tracks2700 mm106.3 in
Track Length - On Ground3270 mm128.7 in
Blade Width4050 mm159.4 in
Ground Clearance575 mm22.6 in
Performance
Speed Forward - Maximum10.30 km/h6.4 MPH
Speed Reverse - Maximum12.20 km/h7.6 MPH
Ground Bearing Pressure111.00 kPa16.1 psi
Drawbar Pull Maximum793 kN178.3 lbf
Implement Pump Flow305.50 l/min10.8 cfm
Operating Weight
Operating Weight41250 kg90,940.6 lb

Features & Benefits

WORKING EQUIPMENT
Blades

  • Standard Semi-U Blade design combines the penetration ability of a straight blade with the increased capacity provided by short wings. It is used for heavy duty applications such as mining and road construction.
  • The Full-U Blade provides high volume movement of light non-cohesive materials such as coal and woodchips.
  • Coal Blade for excellent coal pile productivity. Its length, height, and wing angles were developed specifically for high production coal dozing. The blade pocket is in the right place to deliver a live, rolling load. Extended end plates help contain loads and eliminate side spillage.

 

BLADE SELECTION SEMI-U FULL-U ANGLE COAL
UNDERCARRIAGE STD STD STD STD
BLADE CAPACITY
SAE J1265
9.6 m3
(12.5 yd3)
11.5 m3
(15.0 yd3)
5.7 m3
(7.4 yd3)
21.0 m3
(27.5 yd3)

Rippers
Adjustable parallelogram multi-shank ripper offers excellent 868 mm (34.2”) penetration in extremely tough materials and can be used with up to 3 shanks adjusted to two vertical positions. The single shank ripper option offers a standard shank with 1250 mm (49.2”) penetration and a deep shank option with an exceptional 1700 mm (66.9”) penetration, allowing full use of the remarkable drawbar pull of the machine.


ENGINE
The TD-25R Extra is powered by a diesel engine that delivers outstanding power & torque;

  • Heavy Duty Cummins QSX 15 litre Tier 4 Final /EU Stage IV Diesel Engine.
  • Direct injection, in-line, 6 cylinder, 4 stroke, turbocharged & Charge Air Cooled (CAC) engine developing 280 kW (375 hp) Net at rated engine speed of 2000 rpm


TRANSMISSION
Transmission system that automatically matches speed to load conditions for optimal push power, preventing driveline shock, multiplying the torque required while delivering 6 forward and 6 reverse speeds.

  • Torque Converter
  • 3-Speed Powershift Transmission
  • 2-Speed Steering Drive
  • Double reduction Final Drive

The modular design drivetrain incorporates the engine, torque converter, transmission, steering drive and final drives. Components can be easily removed & re-fitted without oil loss ensuring maximum machine uptime.


HYDRAULICS
A proven design multiple pump system & high capacity hydraulic reservoir for improved cooling. Hose & tube routings are accessible and yet well protected to prevent accidental damage. Trimble ready option is available on factory build orders.

Two-speed steering module on Dressta dozers maintains power to both tracks – at all times. You get the benefit of vastly improved traction to push loads effortlessly through turns, quickly and smoothly.


CAB - OPERATOR STATION & CONTROLS
Deluxe 6-sided ROPS / FOPS Cab with enlarged glass area provides a clear and direct line of sight to both the blade and ripper. The comfortable, sound-suppressed, pressurised cab is equipped with:

  • Efficient air recirculation system
  • Air conditioner & heater with multiple vents
  • Deluxe air suspension seat with adjustable arm rests. The seat swivels 14 degrees to the right for better ripper viewing
  • Ergonomically designed joystick controls for direction, blade and ripper operations.


ROBUST FRAME AND UNDERCARRIAGE
DRESSTA Mainframe and Track frame system ensures excellent machine balance for dozing, ripping, or final grading applications. 

  • Mainframe – a one-piece weldment consisting of the front frame, rear frame, and equaliser bar. The rugged design of the mainframe absorbs impact shock loads and twisting forces to ensure a long life.
  • High quality sealed and lifetime lubricated track rollers
  • Heavy-duty idlers and track tensioners

Tracks – High quality durable tracks for tough working conditions;

  • Track Chain - Links made of drop forged steel alloy and strutted to resist twisting and working stresses.
  • Track Shoes - Wide range of track shoe widths helps to match TD-25R Extra perfectly to all types of ground conditions.
  • Dressta Lubricated Track System (LTS)

Track Chain Guides and Track Roller Guards – Track chain guides are standard equipment and full length track roller guards are optional.

  • Suspension System – 3-point suspension system consisting of two pivot shafts and equaliser bar.

Optimal power to weight ratio for unrivalled traction & drawbar pull…

The TD-20R sets the standards for others to follow and is a result of DRESSTA’s experience in designing highly efficient and productive Crawler Dozers.

Design concepts utilised in the TD-20R include, optimisation of weight distribution, modular construction, and use of a one-piece main frame, two-speed Steering Drive and a 3-point track mounting system. Optimal performance is achieved when machine weight is matched to power and the TD-20R provides a second-to-none balance of weight for traction and power for unrivalled drawbar pull.

 

Key Specifications

Driveline
Engine Manufacturer / Model / TierCummins/QSL 9/T4I
Displacement8.90 l543.1 in3
Rated Speed2200 RPM
Engine Output - Net185 kW248 hp
Rated Speed - Torque1500 RPM
Engine Torque1213 Nm894.7 lb/ft
Transmission Type - Fwd Rev SpeedsPowershift - 6/6
Carrier Rollers / Track Rollers2/6
Shoe Pitch216 mm8.5 in
Track Shoe Width560 mm22.0 in
Ground Contact Area32000 cm24,960.0 in2
Number of Shoes40
Capacities
Fuel Tank490 l129.4 Gal(US)
Hydraulic Tank115 l30.4 Gal(US)
Blade Capacity7.04 m39.2 yd3
Dimensions
Height Top of ROPS (Max)3570 mm140.6 in
Width - Over Tracks2540 mm100.0 in
Track Length - On Ground2860 mm112.6 in
Blade Width3500 mm137.8 in
Performance
Speed Forward - Maximum10.50 km/h6.5 MPH
Speed Reverse - Maximum12.20 km/h7.6 MPH
Ground Bearing Pressure74.10 kPa10.7 psi
Drawbar Pull Maximum610 kN137.1 lbf
Implement Pump Flow239.70 l/min8.5 cfm
Operating Weight
Operating Weight24340 kg53,660.5 lb

Features & Benefits

WORKING EQUIPMENT
Blades

  • Standard Semi-U Blade design combines the penetration ability of a straight blade with the increased capacity provided by short wings. It is used for heavy duty applications such as mining and road construction.
  • The Full-U Blade provides high volume movement of light non-cohesive materials such as coal and woodchips.
  • Angle Blade with tilt is ideal for side casting, backfilling, cutting ditches or setting a final grade by reducing the amount of manoeuvering required to do these jobs.
BLADE SELECTION SEMI-U FULL-U ANGLE
UNDERCARRIAGE STD & LT STD & LT STD & LT
BLADE CAPACITY
SAE J1265
7.04 m3
(9.2 yd3)
8.45 m3
(11.1 yd3)
3.88 m3
(5.1 yd3)

Rippers
Adjustable parallelogram multi-shank ripper offers excellent 700 mm (27.6”) penetration in extremely tough materials and can be used with up to 3 shanks adjusted to two vertical positions. The single shank ripper option offers a deeper penetration of 834 mm (32.8”).


ENGINE
The TD-20R is powered by a diesel engine that delivers outstanding power & torque;

  • Heavy Duty Cummins QSL 8.9 litre Tier 4 Interim/EU Stage IIIB Diesel Engine.
  • Direct injection, in-line, 6 cylinder, 4 stroke, turbocharged & Charge Air Cooled (CAC) engine developing 185 kW (248 hp) Net at rated engine speed of 2200 rpm


TRANSMISSION
Transmission system that automatically matches speed to load conditions for optimal push power, preventing driveline shock, multiplying the torque required while delivering 6 forward and 6 reverse speeds.

  • Torque Converter
  • 3-Speed Powershift Transmission
  • 2-Speed Steering Drive
  • Double reduction Final Drive

The modular design drivetrain incorporates the engine, torque converter, transmission, steering drive and final drives. Components can be easily removed & re-fitted without oil loss ensuring maximum machine uptime.


HYDRAULICS
A proven design multiple pump system & high capacity hydraulic reservoir for improved cooling. Hose & tube routings are accessible and yet well protected to prevent accidental damage. Trimble ready option is available on factory build orders.

Two-speed steering module on Dressta dozers maintains power to both tracks – at all times. You get the benefit of vastly improved traction to push loads effortlessly through turns, quickly and smoothly.


CAB - OPERATOR STATION & CONTROLS
Deluxe 6-sided ROPS / FOPS Cab with enlarged glass area provides a clear and direct line of sight to both the blade and ripper. The comfortable, sound-suppressed, pressurised cab is equipped with:

  • Efficient air recirculation system
  • Air conditioner & heater with multiple vents
  • Deluxe air suspension seat with adjustable arm rests. The seat swivels 14 degrees to the right for better ripper viewing
  • Ergonomically designed joystick controls for direction, blade and ripper operations.


ROBUST FRAME AND UNDERCARRIAGE
DRESSTA Mainframe and Track frame system ensures excellent machine balance for dozing, ripping, or final grading applications.

  • Mainframe – a one-piece weldment consisting of the front frame, rear frame, and equaliser bar. The rugged design of the mainframe absorbs impact shock loads and twisting forces to ensure a long life.
  • High quality sealed and lifetime lubricated track rollers
  • Heavy-duty idlers and track tensioners

Tracks – High quality durable tracks for tough working conditions;

  • Track Chain - Links made of drop forged steel alloy and strutted to resist twisting and working stresses.
  • Track Shoes - Wide range of track shoe widths helps to match TD-20R perfectly to all types of ground conditions.
  • Dressta Lubricated Track System (LTS)

Track Chain Guides and Track Roller Guards – Track chain guides are standard equipment and full length track roller guards are optional.

Suspension System – 3-point suspension system consisting of two pivot shafts and equaliser bar.

Optimal Long Tracks (LT) for high performance traction, ripping and dozing in hard ground …

The TD-20R LT sets the standards for others to follow and is a result of DRESSTA’s experience in designing highly efficient and productive Crawler Dozers.

Design concepts utilised in the TD-20R LT include, optimisation of weight distribution, modular construction, and use of a one-piece main frame, two-speed Steering Drive and a 3-point track mounting system. Optimal performance is achieved when machine weight is matched to power and the TD-20R LT provides a second-to-none balance of weight for traction and power for unrivalled drawbar pull.

 

Key Specifications

Driveline
Engine Manufacturer / Model / TierCummins/QSL 9/T4I
Displacement8.90 l543.1 in3
Rated Speed2200 RPM
Engine Output - Net185 kW248 hp
Rated Speed - Torque1500 RPM
Engine Torque1213 Nm894.7 lb/ft
Transmission Type - Fwd Rev SpeedsPowershift - 6/6
Carrier Rollers / Track Rollers2/6
Shoe Pitch216 mm8.5 in
Track Shoe Width560 mm22.0 in
Ground Contact Area34000 cm25,270.0 in2
Number of Shoes42
Capacities
Fuel Tank490 l129.4 Gal(US)
Hydraulic Tank115 l30.4 Gal(US)
Blade Capacity7.04 m39.2 yd3
Dimensions
Height Top of ROPS (Max)3570 mm140.6 in
Width - Over Tracks2540 mm100.0 in
Track Length - On Ground3080 mm121.3 in
Blade Width3500 mm137.8 in
Performance
Speed Forward - Maximum10.50 km/h6.5 MPH
Speed Reverse - Maximum12.20 km/h7.6 MPH
Ground Bearing Pressure71.40 kPa10.4 psi
Drawbar Pull Maximum610 kN137.1 lbf
Implement Pump Flow239.70 l/min8.5 cfm
Operating Weight
Operating Weight24900 kg54,895.0 lb

Features & Benefits

WORKING EQUIPMENT
Blades

  • Standard Semi-U Blade design combines the penetration ability of a straight blade with the increased capacity provided by short wings. It is used for heavy duty applications such as mining and road construction.
  • The Full-U Blade provides high volume movement of light non-cohesive materials such as coal and woodchips.
  • Angle Blade with tilt is ideal for side casting, backfilling, cutting ditches or setting a final grade by reducing the amount of manoeuvering required to do these jobs.
BLADE SELECTION SEMI-U FULL-U ANGLE
UNDERCARRIAGE STD & LT STD & LT STD & LT
BLADE CAPACITY
SAE J1265
7.04 m3
(9.2 yd3)
8.45 m3
(11.1 yd3)
3.88 m3
(5.1 yd3)

Rippers
Adjustable parallelogram multi-shank ripper offers excellent 700 mm (27.6”) penetration in extremely tough materials and can be used with up to 3 shanks adjusted to two vertical positions. The single shank ripper option offers a deeper penetration of 834 mm (32.8”).


ENGINE
The TD-20R LT is powered by a diesel engine that delivers outstanding power & torque;

  • Heavy Duty Cummins QSL 8.9 litre Tier 4 Interim/EU Stage IIIB Diesel Engine.
  • Direct injection, in-line, 6 cylinder, 4 stroke, turbocharged & Charge Air Cooled (CAC) engine developing 185 kW (248 hp) Net at rated engine speed of 2200 rpm


TRANSMISSION
Transmission system that automatically matches speed to load conditions for optimal push power, preventing driveline shock, multiplying the torque required while delivering 6 forward and 6 reverse speeds.

  • Torque Converter
  • 3-Speed Powershift Transmission
  • 2-Speed Steering Drive
  • Double reduction Final Drive

The modular design drivetrain incorporates the engine, torque converter, transmission, steering drive and final drives. Components can be easily removed & re-fitted without oil loss ensuring maximum machine uptime.


HYDRAULICS
A proven design multiple pump system & high capacity hydraulic reservoir for improved cooling. Hose & tube routings are accessible and yet well protected to prevent accidental damage. Trimble ready option is available on factory build orders.

Two-speed steering module on Dressta dozers maintains power to both tracks – at all times. You get the benefit of vastly improved traction to push loads effortlessly through turns, quickly and smoothly.


CAB - OPERATOR STATION & CONTROLS
Deluxe 6-sided ROPS / FOPS Cab with enlarged glass area provides a clear and direct line of sight to both the blade and ripper. The comfortable, sound-suppressed, pressurised cab is equipped with:

  • Efficient air recirculation system
  • Air conditioner & heater with multiple vents
  • Deluxe air suspension seat with adjustable arm rests. The seat swivels 14 degrees to the right for better ripper viewing
  • Ergonomically designed joystick controls for direction, blade and ripper operations.


ROBUST FRAME AND UNDERCARRIAGE
DRESSTA Mainframe and Track frame system ensures excellent machine balance for dozing, ripping, or final grading applications.

  • Mainframe – a one-piece weldment consisting of the front frame, rear frame, and equaliser bar. The rugged design of the mainframe absorbs impact shock loads and twisting forces to ensure a long life.
  • High quality sealed and lifetime lubricated track rollers
  • Heavy-duty idlers and track tensioners

Tracks – High quality durable tracks for tough working conditions;

  • Track Chain - Links made of drop forged steel alloy and strutted to resist twisting and working stresses.
  • Track Shoes - Wide range of track shoe widths helps to match TD-20R LT perfectly to all types of ground conditions.
  • Dressta Lubricated Track System (LTS)

Track Chain Guides and Track Roller Guards – Track chain guides are standard equipment and full length track roller guards are optional.

Suspension System – 3-point suspension system consisting of two pivot shafts and equaliser bar.