change

Experience | Arctic

Arctic

Take on the Tundra

Arctic

Dressta dozers, wheel loaders and pipelayers have been refined for superior performance in arctic conditions. The machines are optimized to perform in extreme temperatures as low as -50°C for extended periods of time.

When you enquire about Dressta machines for arctic construction, we can advise on machine modifications for flawless cold weather performance. We can also implement Special Feature Requests (SFR) for specific requirements. Explore our dozer, wheel loader and pipelayer equipment – built for your projects in the most challenging environments.

If you cannot find the model below with the appropriate engine configuration (Emission Levels: Tier 3, Tier 4 Interim, Tier 4 Final) for your region, please email us or contact your local dealer.

1 TD 25M

3 TD 25M

5 SB 60

6 SB 60

OPERATE AT -50°C

Dressta machines are highly durable and can weather any storm. There are specific features installed in our machines that enable them to excel in temperatures of -50°C or below, such as advanced heating systems for the engine, fuel, oils and cab.

SPECIALLY DESIGNED ARCTIC CABS

Performance under extreme temperatures requires more than optimized technical parameters. Our machines can be equipped with specially designed arctic cabs for ultimate operator comfort and thermal protection.

Site Preparation

Dressta dozers and wheel loaders can perform a number of tasks in arctic applications such as ore and diamond mining, or exploration work. From clearing tundra and excavating mined material, to towing heavy sledge equipment to the site – Dressta machines are essential components in any arctic project.

Pipelayers

Pipelaying in the arctic may require machines to operate with intense levels of performance. Our pipelayers can be equipped with arctic technologies to ensure project productivity in the harshest conditions.

For additional information on why Dressta machines are ideal for arctic applications, find your nearest Dressta dealer.

Machines Engineered for Arctic

Key Specifications

Driveline
Engine Manufacturer / Model / Tier Cummins/QSB 6.7/T4F
Displacement 6.7 l 408.9 in3
Rated Speed 2000 RPM
Engine Output - Net 154 kW 207 hp
Rated Speed - Torque 1500 RPM
Engine Torque 949 Nm 699.9 lb/ft
Transmission Type - Fwd Rev Speeds Powershift - 6/6
Carrier Rollers / Track Rollers 2/6
Shoe Pitch 203 mm 8.0 in
Track Shoe Width 508 mm 20.0 in
Ground Contact Area 27000 cm2 4,185.0 in2
Number of Shoes 39
Capacities
Fuel Tank 330 l 87.2 Gal(US)
Hydraulic Tank 60 l 15.9 Gal(US)
Blade Capacity 5.7 m3 7.5 yd3
Dimensions
Height Top of ROPS (Max) 3450 mm 135.8 in
Ground Clearance 445 mm 17.5 in
Width - Over Tracks 2440 mm 96.1 in
Track Length - On Ground 2640 mm 103.9 in
Blade Width 3440 mm 135.4 in
Ground Clearance 445 mm 17.5 in
Performance
Speed Forward - Maximum 10.5 km/h 6.5 MPH
Speed Reverse - Maximum 12.3 km/h 7.6 MPH
Ground Bearing Pressure 75.4 kPa 10.9 psi
Drawbar Pull Maximum 580 kN 130.4 lbf
Implement Pump Flow 164 l/min 5.8 cfm
Operating Weight
Operating Weight 20760 kg 45,767.9 lb

Features & Benefits

Key Specifications

Driveline
Engine Manufacturer / Model / Tier Cummins/QSB 6.7/T4F
Displacement 6.7 l 408.9 in3
Rated Speed 2000 RPM
Engine Output - Net 154 kW 207 hp
Rated Speed - Torque 1500 RPM
Engine Torque 949 Nm 699.9 lb/ft
Transmission Type - Fwd Rev Speeds Powershift - 6/6
Carrier Rollers / Track Rollers 2/8
Shoe Pitch 203 mm 8.0 in
Track Shoe Width 940 mm 37.0 in
Ground Contact Area 57000 cm2 8,835.0 in2
Number of Shoes 43
Capacities
Fuel Tank 330 l 87.2 Gal(US)
Hydraulic Tank 60 l 15.9 Gal(US)
Blade Capacity 3.6 m3 4.7 yd3
Dimensions
Height Top of ROPS (Max) 3450 mm 135.8 in
Ground Clearance 445 mm 17.5 in
Width - Over Tracks 3100 mm 122.0 in
Track Length - On Ground 3050 mm 120.1 in
Blade Width 3860 mm 152.0 in
Ground Clearance 445 mm 17.5 in
Performance
Speed Forward - Maximum 10.5 km/h 6.5 MPH
Speed Reverse - Maximum 12.3 km/h 7.6 MPH
Ground Bearing Pressure 37.4 kPa 5.4 psi
Drawbar Pull Maximum 580 kN 130.4 lbf
Implement Pump Flow 164 l/min 5.8 cfm
Operating Weight
Operating Weight 21720 kg 47,884.3 lb

Features & Benefits


ENGINEERED FOR YOUR BUSINESS

Key Specifications

Features & Benefits


ENGINEERED FOR YOUR BUSINESS

Key Specifications

Driveline
Engine Manufacturer / Model / Tier Cummins/QSB 6.7/T4F
Displacement 6.7 l 408.9 in3
Rated Speed 2000 RPM
Engine Output - Net 154 kW 207 hp
Rated Speed - Torque 1500 RPM
Engine Torque 949 Nm 699.9 lb/ft
Transmission Type - Fwd Rev Speeds Powershift - 6/6
Carrier Rollers / Track Rollers 2/8
Shoe Pitch 203 mm 8.0 in
Track Shoe Width 508 mm 20.0 in
Ground Contact Area 31000 cm2 4,805.0 in2
Number of Shoes 43
Capacities
Fuel Tank 330 l 87.2 Gal(US)
Hydraulic Tank 60 l 15.9 Gal(US)
Blade Capacity 5.7 m3 7.5 yd3
Dimensions
Height Top of ROPS (Max) 3450 mm 135.8 in
Ground Clearance 445 mm 17.5 in
Width - Over Tracks 2440 mm 96.1 in
Track Length - On Ground 3050 mm 120.1 in
Blade Width 3440 mm 135.4 in
Ground Clearance 445 mm 17.5 in
Performance
Speed Forward - Maximum 10.5 km/h 6.5 MPH
Speed Reverse - Maximum 12.3 km/h 7.6 MPH
Ground Bearing Pressure 66.2 kPa 9.6 psi
Drawbar Pull Maximum 580 kN 130.4 lbf
Implement Pump Flow 164 l/min 5.8 cfm
Operating Weight
Operating Weight 20910 kg 46,098.6 lb

Features & Benefits


ENGINEERED FOR YOUR BUSINESS

Key Specifications

Driveline
Engine Manufacturer / Model / Tier Cummins/QSB 6.7/T4F
Displacement 6.7 l 408.9 in3
Rated Speed 2000 RPM
Engine Output - Net 154 kW 207 hp
Rated Speed - Torque 1500 RPM
Engine Torque 949 Nm 699.9 lb/ft
Transmission Type - Fwd Rev Speeds Powershift - 6/6
Carrier Rollers / Track Rollers 2/8
Shoe Pitch 203 mm 8.0 in
Track Shoe Width 762 mm 30.0 in
Ground Contact Area 46000 cm2 7,130.0 in2
Number of Shoes 43
Capacities
Fuel Tank 330 l 87.2 Gal(US)
Hydraulic Tank 60 l 15.9 Gal(US)
Blade Capacity 5.95 m3 7.8 yd3
Dimensions
Height Top of ROPS (Max) 3450 mm 135.8 in
Ground Clearance 445 mm 17.5 in
Width - Over Tracks 2790 mm 109.8 in
Track Length - On Ground 3050 mm 120.1 in
Blade Width 3300 mm 129.9 in
Ground Clearance 445 mm 17.5 in
Performance
Speed Forward - Maximum 10.5 km/h 6.5 MPH
Speed Reverse - Maximum 12.3 km/h 7.6 MPH
Ground Bearing Pressure 45.7 kPa 6.6 psi
Drawbar Pull Maximum 580 kN 130.4 lbf
Implement Pump Flow 164 l/min 5.8 cfm

Features & Benefits

BLADE SELECTION SEMI-U  6-WAY
UNDERCARRIAGE WT WT
BLADE CAPACITY
SAE J1265
5.95 m3
(7.8 yd3)
3.4 m3
(4.4 yd3)


ENGINEERED FOR YOUR BUSINESS

Key Specifications

Driveline
Engine Manufacturer / Model / Tier Cummins/QSL9/T4F
Displacement 8.9 l 543.1 in3
Rated Speed 2200 RPM
Engine Output - Net 185 kW 248 hp
Rated Speed - Torque 1500 RPM
Engine Torque 1213 Nm 894.7 lb/ft
Transmission Type - Fwd Rev Speeds Powershift - 6/6
Carrier Rollers / Track Rollers 2/6
Shoe Pitch 216 mm 8.5 in
Track Shoe Width 560 mm 22.0 in
Ground Contact Area 32000 cm2 4,960.0 in2
Number of Shoes 40
Capacities
Fuel Tank 420 l 111.0 Gal(US)
Hydraulic Tank 115 l 30.4 Gal(US)
Blade Capacity 7.04 m3 9.2 yd3
Dimensions
Height Top of ROPS (Max) 3480 mm 137.0 in
Ground Clearance 460 mm 18.1 in
Width - Over Tracks 2540 mm 100.0 in
Track Length - On Ground 2860 mm 112.6 in
Blade Width 3500 mm 137.8 in
Ground Clearance 460 mm 18.1 in
Performance
Speed Forward - Maximum 10.5 km/h 6.5 MPH
Speed Reverse - Maximum 12.2 km/h 7.6 MPH
Ground Bearing Pressure 73.5 kPa 10.7 psi
Drawbar Pull Maximum 610 kN 137.1 lbf
Implement Pump Flow 239.7 l/min 8.5 cfm
Operating Weight
Operating Weight 24340 kg 53,660.5 lb

Features & Benefits

Key Specifications

Driveline
Engine Manufacturer / Model / Tier Cummins/QSL9/T4F
Displacement 8.9 l 543.1 in3
Rated Speed 2200 RPM
Engine Output - Net 185 kW 248 hp
Rated Speed - Torque 1500 RPM
Engine Torque 1213 Nm 894.7 lb/ft
Transmission Type - Fwd Rev Speeds Powershift - 6/6
Carrier Rollers / Track Rollers 2/6
Shoe Pitch 216 mm 8.5 in
Track Shoe Width 560 mm 22.0 in
Ground Contact Area 32000 cm2 4,960.0 in2
Number of Shoes 40
Capacities
Fuel Tank 420 l 111.0 Gal(US)
Hydraulic Tank 115 l 30.4 Gal(US)
Blade Capacity 14.1 m3 18.4 yd3
Dimensions
Height Top of ROPS (Max) 3570 mm 140.6 in
Ground Clearance 460 mm 18.1 in
Width - Over Tracks 2540 mm 100.0 in
Track Length - On Ground 2860 mm 112.6 in
Blade Width 3500 mm 137.8 in
Ground Clearance 460 mm 18.1 in
Performance
Speed Forward - Maximum 10.5 km/h 6.5 MPH
Speed Reverse - Maximum 12.2 km/h 7.6 MPH
Ground Bearing Pressure 83.3 kPa 12.1 psi
Drawbar Pull Maximum 610 kN 137.1 lbf
Implement Pump Flow 239.7 l/min 8.5 cfm
Operating Weight
Operating Weight 27210 kg 59,987.7 lb

Features & Benefits


ENGINEERED FOR YOUR BUSINESS

Key Specifications

Driveline
Engine Manufacturer / Model / Tier Cummins/QSL9/T4F
Displacement 8.9 l 543.1 in3
Rated Speed 2200 RPM
Engine Output - Net 185 kW 248 hp
Rated Speed - Torque 1500 RPM
Engine Torque 1213 Nm 894.7 lb/ft
Transmission Type - Fwd Rev Speeds Powershift - 6/6
Carrier Rollers / Track Rollers 2/6
Shoe Pitch 216 mm 8.5 in
Track Shoe Width 864 mm 34.0 in
Ground Contact Area 53000 cm2 8,215.0 in2
Number of Shoes 42
Capacities
Fuel Tank 420 l 111.0 Gal(US)
Hydraulic Tank 115 l 30.4 Gal(US)
Blade Capacity 13 m3 17.0 yd3
Dimensions
Height Top of ROPS (Max) 3570 mm 140.6 in
Ground Clearance 460 mm 18.1 in
Width - Over Tracks 3050 mm 120.1 in
Track Length - On Ground 3080 mm 121.3 in
Blade Width 4370 mm 172.0 in
Ground Clearance 460 mm 18.1 in
Performance
Speed Forward - Maximum 10.5 km/h 6.5 MPH
Speed Reverse - Maximum 12.2 km/h 7.6 MPH
Ground Bearing Pressure 52 kPa 7.5 psi
Drawbar Pull Maximum 610 kN 137.1 lbf
Implement Pump Flow 239.7 l/min 8.5 cfm
Operating Weight
Operating Weight 28240 kg 62,258.5 lb

Features & Benefits


ENGINEERED FOR YOUR BUSINESS

Key Specifications

Driveline
Engine Manufacturer / Model / Tier Cummins/QSL9/T4F
Displacement 8.9 l 543.1 in3
Rated Speed 2200 RPM
Engine Output - Net 185 kW 248 hp
Rated Speed - Torque 1500 RPM
Engine Torque 1213 Nm 894.7 lb/ft
Transmission Type - Fwd Rev Speeds Powershift - 6/6
Carrier Rollers / Track Rollers 2/6
Shoe Pitch 216 mm 8.5 in
Track Shoe Width 560 mm 22.0 in
Ground Contact Area 35000 cm2 5,425.0 in2
Number of Shoes 42
Capacities
Fuel Tank 420 l 111.0 Gal(US)
Hydraulic Tank 115 l 30.4 Gal(US)
Blade Capacity 14.1 m3 18.4 yd3
Dimensions
Height Top of ROPS (Max) 3570 mm 140.6 in
Ground Clearance 460 mm 18.1 in
Width - Over Tracks 2540 mm 100.0 in
Track Length - On Ground 3080 mm 121.3 in
Blade Width 3500 mm 137.8 in
Ground Clearance 460 mm 18.1 in
Performance
Speed Forward - Maximum 10.5 km/h 6.5 MPH
Speed Reverse - Maximum 12.2 km/h 7.6 MPH
Ground Bearing Pressure 78.9 kPa 11.4 psi
Drawbar Pull Maximum 610 kN 137.1 lbf
Implement Pump Flow 239.7 l/min 8.5 cfm
Operating Weight
Operating Weight 27770 kg 61,222.3 lb

Features & Benefits


ENGINEERED FOR YOUR BUSINESS

Key Specifications

Driveline
Engine Manufacturer / Model / Tier Cummins/QSL9/T4F
Displacement 8.9 l 543.1 in3
Rated Speed 2200 RPM
Engine Output - Net 185 kW 248 hp
Rated Speed - Torque 1500 RPM
Engine Torque 1213 Nm 894.7 lb/ft
Transmission Type - Fwd Rev Speeds Powershift - 6/6
Carrier Rollers / Track Rollers 2/6
Shoe Pitch 216 mm 8.5 in
Track Shoe Width 864 mm 34.0 in
Ground Contact Area 53000 cm2 8,215.0 in2
Number of Shoes 42
Capacities
Fuel Tank 420 l 111.0 Gal(US)
Hydraulic Tank 115 l 30.4 Gal(US)
Blade Capacity 6.03 m3 7.9 yd3
Dimensions
Height Top of ROPS (Max) 3570 mm 140.6 in
Ground Clearance 460 mm 18.1 in
Width - Over Tracks 3050 mm 120.1 in
Track Length - On Ground 3080 mm 121.3 in
Blade Width 4370 mm 172.0 in
Ground Clearance 460 mm 18.1 in
Performance
Speed Forward - Maximum 10.5 km/h 6.5 MPH
Speed Reverse - Maximum 12.2 km/h 7.6 MPH
Ground Bearing Pressure 46.3 kPa 6.7 psi
Drawbar Pull Maximum 610 kN 137.1 lbf
Implement Pump Flow 239.7 l/min 8.5 cfm
Operating Weight
Operating Weight 25370 kg 55,931.2 lb

Features & Benefits

Key Specifications

Driveline
Engine Manufacturer / Model / Tier Cummins/QSL9/T4F
Displacement 8.9 l 543.1 in3
Rated Speed 2200 RPM
Engine Output - Net 185 kW 248 hp
Rated Speed - Torque 1500 RPM
Engine Torque 1213 Nm 894.7 lb/ft
Transmission Type - Fwd Rev Speeds Powershift - 6/6
Carrier Rollers / Track Rollers 2/6
Shoe Pitch 216 mm 8.5 in
Track Shoe Width 560 mm 22.0 in
Ground Contact Area 34000 cm2 5,270.0 in2
Number of Shoes 42
Capacities
Fuel Tank 420 l 111.0 Gal(US)
Hydraulic Tank 115 l 30.4 Gal(US)
Blade Capacity 7.04 m3 9.2 yd3
Dimensions
Height Top of ROPS (Max) 3570 mm 140.6 in
Ground Clearance 460 mm 18.1 in
Width - Over Tracks 2540 mm 100.0 in
Track Length - On Ground 3080 mm 121.3 in
Blade Width 3500 mm 137.8 in
Ground Clearance 460 mm 18.1 in
Performance
Speed Forward - Maximum 10.5 km/h 6.5 MPH
Speed Reverse - Maximum 12.2 km/h 7.6 MPH
Ground Bearing Pressure 70.8 kPa 10.3 psi
Drawbar Pull Maximum 610 kN 137.1 lbf
Implement Pump Flow 239.7 l/min 8.5 cfm
Operating Weight
Operating Weight 24900 kg 54,895.0 lb

Features & Benefits

Optimal power to weight ratio for unrivalled traction & drawbar pull…

The TD-40E Extra sets the standards for others to follow and is a result of DRESSTA’s experience in designing highly efficient and productive Crawler Dozers.

Design concepts utilised in the TD-40E Extra include, optimisation of weight distribution, modular construction, and use of a one-piece main frame, two-speed Steering Drive and a 3-point track mounting system. Optimal performance is achieved when machine weight is matched to power and the TD-40E Extra provides a second-to-none balance of weight for traction and power for unrivalled drawbar pull.

 

Key Specifications

Driveline
Engine Manufacturer / Model / Tier Cummins/QSK 19/T3
Displacement 19 l 1,159.5 in3
Rated Speed 2000 RPM
Engine Output - Net 384 kW 515 hp
Rated Speed - Torque 1500 RPM
Engine Torque 2379 Nm 1,754.7 lb/ft
Transmission Type - Fwd Rev Speeds Powershift - 6/6
Carrier Rollers / Track Rollers 2/6
Shoe Pitch 280 mm 11.0 in
Track Shoe Width 610 mm 24.0 in
Ground Contact Area 44000 cm2 6,820.0 in2
Number of Shoes 39
Capacities
Fuel Tank 1362 l 359.8 Gal(US)
Hydraulic Tank 169 l 44.6 Gal(US)
Blade Capacity 18.6 m3 24.3 yd3
Dimensions
Height Top of ROPS (Max) 4220 mm 166.1 in
Width - Over Tracks 3110 mm 122.4 in
Track Length - On Ground 3610 mm 142.1 in
Blade Width 4810 mm 189.4 in
Performance
Speed Forward - Maximum 12 km/h 7.5 MPH
Speed Reverse - Maximum 14.9 km/h 9.3 MPH
Ground Bearing Pressure 151 kPa 21.9 psi
Drawbar Pull Maximum 1162 kN 261.2 lbf
Implement Pump Flow 398 l/min 14.1 cfm
Operating Weight
Operating Weight 67700 kg 149,252.8 lb

Features & Benefits

WORKING EQUIPMENT
Blades

  • Standard Semi-U Blade design combines the penetration ability of a straight blade with the increased capacity provided by short wings. It is used for heavy duty applications such as mining and road construction.
  • The Full-U Blade provides high volume movement of light non-cohesive materials such as coal and woodchips.
  • Coal Blade for excellent coal pile productivity. Its length, height, and wing angles were developed specifically for high production coal dozing. The blade pocket is in the right place to deliver a live, rolling load. Extended end plates help contain loads and eliminate side spillage.
BLADE SELECTION SEMI-U FULL-U COAL
UNDERCARRIAGE STD STD STD
BLADE CAPACITY
SAE J1265
18.6 m3
(24.3 yd3)
22.8 m3
(29.8 yd3)
39.8 m3
(52.0 yd3)

Rippers
Adjustable parallelogram multi-shank ripper offers excellent 1000 mm (39”) penetration in extremely tough materials and can be used with up to 3 shanks adjusted to two vertical positions. The single shank ripper option offers a standard shank with 1290 mm (51”) penetration and a deep shank option with an exceptional 1670 mm (66”) penetration, allowing full use of the remarkable drawbar pull of the machine.


ENGINE
The TD-40E Extra is powered by a diesel engine that delivers outstanding power & torque;

  • Heavy Duty Cummins QSK 19 liter Tier 3 /EU Stage IIIA Diesel Engine.
  • Direct injection, in-line, 6 cylinder, 4 stroke, turbocharged & Charge Air Cooled (CAC) engine developing 384 kW (515 hp) Net at rated engine speed of 2000 rpm 


TRANSMISSION
Transmission system that automatically matches speed to load conditions for optimal push power, preventing driveline shock, multiplying the torque required while delivering 6 forward and 6 reverse speeds.

  • Torque Converter
  • 3-Speed Powershift Transmission
  • 2-Speed Steering Drive
  • Double reduction Final Drive

The modular design drivetrain incorporates the engine, torque converter, transmission, steering drive and final drives. Components can be easily removed & re-fitted without oil loss ensuring maximum machine uptime.


HYDRAULICS
A proven design multiple pump system & high capacity hydraulic reservoir for improved cooling. Hose & tube routings are accessible and yet well protected to prevent accidental damage. Trimble ready option is available on factory build orders.

Two-speed steering module on Dressta dozers maintains power to both tracks – at all times. You get the benefit of vastly improved traction to push loads effortlessly through turns, quickly and smoothly.


CAB - OPERATOR STATION & CONTROLS
Deluxe 6-sided ROPS / FOPS Cab with enlarged glass area provides a clear and direct line of sight to both the blade and ripper. The comfortable, sound-suppressed, pressurised cab is equipped with:

  • Efficient air recirculation system
  • Air conditioner & heater with multiple vents
  • Deluxe air suspension seat with adjustable arm rests. The seat swivels 14 degrees to the right for better ripper viewing
  • Ergonomically designed joystick controls for direction, blade and ripper operations.


ROBUST FRAME AND UNDERCARRIAGE
DRESSTA Mainframe and Track frame system ensures excellent machine balance for dozing, ripping, or final grading applications.

  • Mainframe – a one-piece weldment consisting of the front frame, rear frame, and equaliser bar. The rugged design of the mainframe absorbs impact shock loads and twisting forces to ensure a long life.
  • High quality sealed and lifetime lubricated track rollers
  • Heavy-duty idlers and track tensioners

Tracks – High quality durable tracks for tough working conditions;

  • Track Chain - Links made of drop forged steel alloy and strutted to resist twisting and working stresses.
  • Track Shoes - Wide range of track shoe widths helps to match TD-40E Extra perfectly to all types of ground conditions.
  • Dressta Lubricated Track System (LTS)

Track Chain Guides and Track Roller Guards – Track chain guides are standard equipment and full length track roller guards are optional.

Suspension System – 3-point suspension system consisting of two pivot shafts and equaliser bar.

Optimal power to weight ratio for unrivalled traction & drawbar pull…

The TD-40E XP sets the standards for others to follow and is a result of DRESSTA’s experience in designing highly efficient and productive Crawler Dozers.

Design concepts utilised in the TD-40E XP include, optimisation of weight distribution, modular construction, and use of a one-piece main frame, two-speed Steering Drive and a 3-point track mounting system. Optimal performance is achieved when machine weight is matched to power and the TD-40E XP provides a second-to-none balance of weight for traction and power for unrivalled drawbar pull.

 

Key Specifications

Driveline
Engine Manufacturer / Model / Tier Cummins/QSK 19/T2
Displacement 19 l 1,159.5 in3
Rated Speed 2100 RPM
Engine Output - Net 388 kW 520 hp
Rated Speed - Torque 1500 RPM
Engine Torque 2237 Nm 1,649.9 lb/ft
Transmission Type - Fwd Rev Speeds Powershift - 6/6
Carrier Rollers / Track Rollers 2/6
Shoe Pitch 280 mm 11.0 in
Track Shoe Width 610 mm 24.0 in
Ground Contact Area 44000 cm2 6,820.0 in2
Number of Shoes 39
Capacities
Fuel Tank 1362 l 359.8 Gal(US)
Hydraulic Tank 169 l 44.6 Gal(US)
Blade Capacity 18.6 m3 24.3 yd3
Dimensions
Height Top of ROPS (Max) 4220 mm 166.1 in
Width - Over Tracks 3110 mm 122.4 in
Track Length - On Ground 3610 mm 142.1 in
Blade Width 4810 mm 189.4 in
Performance
Speed Forward - Maximum 12 km/h 7.5 MPH
Speed Reverse - Maximum 14.9 km/h 9.3 MPH
Ground Bearing Pressure 151 kPa 21.9 psi
Drawbar Pull Maximum 1162 kN 261.2 lbf
Implement Pump Flow 398 l/min 14.1 cfm
Operating Weight
Operating Weight 67700 kg 149,252.8 lb

Features & Benefits

WORKING EQUIPMENT
Blades

  • Standard Semi-U Blade design combines the penetration ability of a straight blade with the increased capacity provided by short wings. It is used for heavy duty applications such as mining and road construction.
  • The Full-U Blade provides high volume movement of light non-cohesive materials such as coal and woodchips.
  • Coal Blade for excellent coal pile productivity. Its length, height, and wing angles were developed specifically for high production coal dozing. The blade pocket is in the right place to deliver a live, rolling load. Extended end plates help contain loads and eliminate side spillage.
BLADE SELECTION SEMI-U FULL-U COAL
UNDERCARRIAGE STD STD STD
BLADE CAPACITY
SAE J1265
18.6 m3
(24.3 yd3)
22.8 m3
(29.8 yd3)
39.8 m3
(52.0 yd3)

Rippers
Adjustable parallelogram multi-shank ripper offers excellent 1000 mm (39”) penetration in extremely tough materials and can be used with up to 3 shanks adjusted to two vertical positions. The single shank ripper option offers a standard shank with 1290 mm (51”) penetration and a deep shank option with an exceptional 1670 mm (66”) penetration, allowing full use of the remarkable drawbar pull of the machine.


ENGINE
The TD-40E XP is powered by a diesel engine that delivers outstanding power & torque;

  • Heavy Duty Cummins QSK 19 litre Tier 2/EU Stage II Diesel Engine.
  • Direct injection, in-line, 6 cylinder, 4 stroke, turbocharged & Charge Air Cooled (CAC) engine developing 388 kW (520 hp) Net at rated engine speed of 2100 rpm
  •  


TRANSMISSION
Transmission system that automatically matches speed to load conditions for optimal push power, preventing driveline shock, multiplying the torque required while delivering 6 forward and 6 reverse speeds.

  • Torque Converter
  • 3-Speed Powershift Transmission
  • 2-Speed Steering Drive
  • Double reduction Final Drive

The modular design drivetrain incorporates the engine, torque converter, transmission, steering drive and final drives. Components can be easily removed & re-fitted without oil loss ensuring maximum machine uptime.


HYDRAULICS
A proven design multiple pump system & high capacity hydraulic reservoir for improved cooling. Hose & tube routings are accessible and yet well protected to prevent accidental damage. Trimble ready option is available on factory build orders.

Two-speed steering module on Dressta dozers maintains power to both tracks – at all times. You get the benefit of vastly improved traction to push loads effortlessly through turns, quickly and smoothly.


CAB - OPERATOR STATION & CONTROLS
Deluxe 6-sided ROPS / FOPS Cab with enlarged glass area provides a clear and direct line of sight to both the blade and ripper. The comfortable, sound-suppressed, pressurised cab is equipped with:

  • Efficient air recirculation system
  • Air conditioner & heater with multiple vents
  • Deluxe air suspension seat with adjustable arm rests. The seat swivels 14 degrees to the right for better ripper viewing
  • Ergonomically designed joystick controls for direction, blade and ripper operations.


ROBUST FRAME AND UNDERCARRIAGE
DRESSTA Mainframe and Track frame system ensures excellent machine balance for dozing, ripping, or final grading applications.

  • Mainframe – a one-piece weldment consisting of the front frame, rear frame, and equaliser bar. The rugged design of the mainframe absorbs impact shock loads and twisting forces to ensure a long life.
  • High quality sealed and lifetime lubricated track rollers
  • Heavy-duty idlers and track tensioners

Tracks – High quality durable tracks for tough working conditions;

  • Track Chain - Links made of drop forged steel alloy and strutted to resist twisting and working stresses.
  • Track Shoes - Wide range of track shoe widths helps to match TD-40E XP perfectly to all types of ground conditions.
  • Dressta Lubricated Track System (LTS)

Track Chain Guides and Track Roller Guards – Track chain guides are standard equipment and full length track roller guards are optional.

Suspension System – 3-point suspension system consisting of two pivot shafts and equaliser bar.

Optimal power to weight ratio for unrivalled traction & drawbar pull…

The TD-40R Extra sets the standards for others to follow and is a result of DRESSTA’s experience in designing highly efficient and productive Crawler Dozers.

Design concepts utilised in the TD-40R Extra include, optimisation of weight distribution, modular construction, and use of a one-piece main frame, two-speed Steering Drive and a 3-point track mounting system. Optimal performance is achieved when machine weight is matched to power and the TD-40R Extra provides a second-to-none balance of weight for traction and power for unrivalled drawbar pull.

 

Key Specifications

Driveline
Engine Manufacturer / Model / Tier Perkins/C 18/T4F
Displacement 18 l 1,098.4 in3
Rated Speed 2000 RPM
Engine Output - Net 394 kW 528 hp
Rated Speed - Torque 1500 RPM
Engine Torque 2379 Nm 1,754.7 lb/ft
Transmission Type - Fwd Rev Speeds Powershift - 6/6
Carrier Rollers / Track Rollers 2/6
Shoe Pitch 280 mm 11.0 in
Track Shoe Width 610 mm 24.0 in
Ground Contact Area 44000 cm2 6,820.0 in2
Number of Shoes 39
Capacities
Fuel Tank 1270 l 335.5 Gal(US)
Hydraulic Tank 169 l 44.6 Gal(US)
Blade Capacity 18.6 m3 24.3 yd3
Dimensions
Height Top of ROPS (Max) 4220 mm 166.1 in
Width - Over Tracks 3110 mm 122.4 in
Track Length - On Ground 3610 mm 142.1 in
Blade Width 4810 mm 189.4 in
Performance
Speed Forward - Maximum 12 km/h 7.5 MPH
Speed Reverse - Maximum 14.9 km/h 9.3 MPH
Ground Bearing Pressure 151 kPa 21.9 psi
Drawbar Pull Maximum 1162 kN 261.2 lbf
Implement Pump Flow 398 l/min 14.1 cfm
Operating Weight
Operating Weight 67700 kg 149,252.8 lb

Features & Benefits

WORKING EQUIPMENT
Blades

  • Standard Semi-U Blade design combines the penetration ability of a straight blade with the increased capacity provided by short wings. It is used for heavy duty applications such as mining and road construction.
  • The Full-U Blade provides high volume movement of light non-cohesive materials such as coal and woodchips.
  • Coal Blade for excellent coal pile productivity. Its length, height, and wing angles were developed specifically for high production coal dozing. The blade pocket is in the right place to deliver a live, rolling load. Extended end plates help contain loads and eliminate side spillage.
BLADE SELECTION SEMI-U FULL-U COAL
UNDERCARRIAGE STD STD STD
BLADE CAPACITY
SAE J1265
18.6 m3
(24.3 yd3)
22.8 m3
(29.8 yd3)
39.8 m3
(52.0 yd3)

Rippers
Adjustable parallelogram multi-shank ripper offers excellent 1000 mm (39”) penetration in extremely tough materials and can be used with up to 3 shanks adjusted to two vertical positions. The single shank ripper option offers a standard shank with 1290 mm (51”) penetration and a deep shank option with an exceptional 1670 mm (66”) penetration, allowing full use of the remarkable drawbar pull of the machine.


ENGINE
The TD-40R Extra is powered by a diesel engine that delivers outstanding power & torque;

  • Heavy Duty Perkins C 18 litre Tier 4 Final /EU Stage IV Diesel Engine.
  • Direct injection, in-line, 6 cylinder, 4 stroke, turbocharged & Charge Air Cooled (CAC) engine developing 394 kW (536 hp) Net at rated engine speed of 2000 rpm


TRANSMISSION
Transmission system that automatically matches speed to load conditions for optimal push power, preventing driveline shock, multiplying the torque required while delivering 6 forward and 6 reverse speeds.

  • Torque Converter
  • 3-Speed Powershift Transmission
  • 2-Speed Steering Drive
  • Double reduction Final Drive

The modular design drivetrain incorporates the engine, torque converter, transmission, steering drive and final drives. Components can be easily removed & re-fitted without oil loss ensuring maximum machine uptime.


HYDRAULICS
A proven design multiple pump system & high capacity hydraulic reservoir for improved cooling. Hose & tube routings are accessible and yet well protected to prevent accidental damage. Trimble ready option is available on factory build orders.

Two-speed steering module on Dressta dozers maintains power to both tracks – at all times. You get the benefit of vastly improved traction to push loads effortlessly through turns, quickly and smoothly.


CAB - OPERATOR STATION & CONTROLS
Deluxe 6-sided ROPS / FOPS Cab with enlarged glass area provides a clear and direct line of sight to both the blade and ripper. The comfortable, sound-suppressed, pressurised cab is equipped with:

  • Efficient air recirculation system
  • Air conditioner & heater with multiple vents
  • Deluxe air suspension seat with adjustable arm rests. The seat swivels 14 degrees to the right for better ripper viewing
  • Ergonomically designed joystick controls for direction, blade and ripper operations.


ROBUST FRAME AND UNDERCARRIAGE
DRESSTA Mainframe and Track frame system ensures excellent machine balance for dozing, ripping, or final grading applications.

  • Mainframe – a one-piece weldment consisting of the front frame, rear frame, and equaliser bar. The rugged design of the mainframe absorbs impact shock loads and twisting forces to ensure a long life.
  • High quality sealed and lifetime lubricated track rollers
  • Heavy-duty idlers and track tensioners

Tracks – High quality durable tracks for tough working conditions;

  • Track Chain - Links made of drop forged steel alloy and strutted to resist twisting and working stresses.
  • Track Shoes - Wide range of track shoe widths helps to match TD-40R Extra perfectly to all types of ground conditions.
  • Dressta Lubricated Track System (LTS)

Track Chain Guides and Track Roller Guards – Track chain guides are standard equipment and full length track roller guards are optional.

Suspension System – 3-point suspension system consisting of two pivot shafts and equaliser bar.