change
    Dressta NET | Press Centre
Machines | Crawler Dozers | TD-40

TD-40

67 tons of pure performance

The Dressta TD-40 is our heaviest and most powerful crawler dozer, with an operating weight of 67.7t and net flywheel power of 515hp. The machines are purpose built for extreme duty construction, coal and mining projects.

Featuring superior draw bar pull and immense ripping performance, the durable TD-40 Series machines are built to withstand the most challenging, abrasive tasks.
View the full specifications, options, SFRs and videos of the TD-40 in action below.

If you cannot find the model below with the appropriate engine configuration (Emission Levels: Tier 3, Tier 4 Interim, Tier 4 Final) for your region, please email us or contact your local dealer.

2 Quarry UZBEKISTAN

3 Coal mine RUSSIA

15

5 TD 40E

1 TD 40E

1 Road construction SOUTH AFRICA

2 Quarry CHILE

4 Brown coal mine POLAND

Basic Specifications

Engine Range 384 kW - 394 kW 515 hp - 528 hp
Weight 67.7 t 149,253 lb
Blade Capacity Range 18.6 - 39.8 m3 24.3 - 52.1 yd3
UNITS:

Available Models

Optimal power to weight ratio for unrivalled traction & drawbar pull…

The TD-40E Extra sets the standards for others to follow and is a result of DRESSTA’s experience in designing highly efficient and productive Crawler Dozers.

Design concepts utilised in the TD-40E Extra include, optimisation of weight distribution, modular construction, and use of a one-piece main frame, two-speed Steering Drive and a 3-point track mounting system. Optimal performance is achieved when machine weight is matched to power and the TD-40E Extra provides a second-to-none balance of weight for traction and power for unrivalled drawbar pull.

 

Key Specifications

Driveline
Engine Manufacturer / Model / Tier Cummins/QSK 19/T3
Displacement 19 l 1,159.5 in3
Rated Speed 2000 RPM
Engine Output - Net 384 kW 515 hp
Rated Speed - Torque 1500 RPM
Engine Torque 2379 Nm 1,754.7 lb/ft
Transmission Type - Fwd Rev Speeds Powershift - 6/6
Carrier Rollers / Track Rollers 2/6
Shoe Pitch 280 mm 11.0 in
Track Shoe Width 610 mm 24.0 in
Ground Contact Area 44000 cm2 6,820.0 in2
Number of Shoes 39
Capacities
Fuel Tank 1362 l 359.8 Gal(US)
Hydraulic Tank 169 l 44.6 Gal(US)
Blade Capacity 18.6 m3 24.3 yd3
Dimensions
Height Top of ROPS (Max) 4220 mm 166.1 in
Width - Over Tracks 3110 mm 122.4 in
Track Length - On Ground 3610 mm 142.1 in
Blade Width 4810 mm 189.4 in
Performance
Speed Forward - Maximum 12 km/h 7.5 MPH
Speed Reverse - Maximum 14.9 km/h 9.3 MPH
Ground Bearing Pressure 151 kPa 21.9 psi
Drawbar Pull Maximum 1162 kN 261.2 lbf
Implement Pump Flow 398 l/min 14.1 cfm
Operating Weight
Operating Weight 67700 kg 149,252.8 lb

Features & Benefits

WORKING EQUIPMENT
Blades

  • Standard Semi-U Blade design combines the penetration ability of a straight blade with the increased capacity provided by short wings. It is used for heavy duty applications such as mining and road construction.
  • The Full-U Blade provides high volume movement of light non-cohesive materials such as coal and woodchips.
  • Coal Blade for excellent coal pile productivity. Its length, height, and wing angles were developed specifically for high production coal dozing. The blade pocket is in the right place to deliver a live, rolling load. Extended end plates help contain loads and eliminate side spillage.
BLADE SELECTION SEMI-U FULL-U COAL
UNDERCARRIAGE STD STD STD
BLADE CAPACITY
SAE J1265		 18.6 m3
(24.3 yd3)		 22.8 m3
(29.8 yd3)		 39.8 m3
(52.0 yd3)

Rippers
Adjustable parallelogram multi-shank ripper offers excellent 1000 mm (39”) penetration in extremely tough materials and can be used with up to 3 shanks adjusted to two vertical positions. The single shank ripper option offers a standard shank with 1290 mm (51”) penetration and a deep shank option with an exceptional 1670 mm (66”) penetration, allowing full use of the remarkable drawbar pull of the machine.


ENGINE
The TD-40E Extra is powered by a diesel engine that delivers outstanding power & torque;

  • Heavy Duty Cummins QSK 19 liter Tier 3 /EU Stage IIIA Diesel Engine.
  • Direct injection, in-line, 6 cylinder, 4 stroke, turbocharged & Charge Air Cooled (CAC) engine developing 384 kW (515 hp) Net at rated engine speed of 2000 rpm 


TRANSMISSION
Transmission system that automatically matches speed to load conditions for optimal push power, preventing driveline shock, multiplying the torque required while delivering 6 forward and 6 reverse speeds.

  • Torque Converter
  • 3-Speed Powershift Transmission
  • 2-Speed Steering Drive
  • Double reduction Final Drive

The modular design drivetrain incorporates the engine, torque converter, transmission, steering drive and final drives. Components can be easily removed & re-fitted without oil loss ensuring maximum machine uptime.


HYDRAULICS
A proven design multiple pump system & high capacity hydraulic reservoir for improved cooling. Hose & tube routings are accessible and yet well protected to prevent accidental damage. Trimble ready option is available on factory build orders.

Two-speed steering module on Dressta dozers maintains power to both tracks – at all times. You get the benefit of vastly improved traction to push loads effortlessly through turns, quickly and smoothly.


CAB - OPERATOR STATION & CONTROLS
Deluxe 6-sided ROPS / FOPS Cab with enlarged glass area provides a clear and direct line of sight to both the blade and ripper. The comfortable, sound-suppressed, pressurised cab is equipped with:

  • Efficient air recirculation system
  • Air conditioner & heater with multiple vents
  • Deluxe air suspension seat with adjustable arm rests. The seat swivels 14 degrees to the right for better ripper viewing
  • Ergonomically designed joystick controls for direction, blade and ripper operations.


ROBUST FRAME AND UNDERCARRIAGE
DRESSTA Mainframe and Track frame system ensures excellent machine balance for dozing, ripping, or final grading applications.

  • Mainframe – a one-piece weldment consisting of the front frame, rear frame, and equaliser bar. The rugged design of the mainframe absorbs impact shock loads and twisting forces to ensure a long life.
  • High quality sealed and lifetime lubricated track rollers
  • Heavy-duty idlers and track tensioners

Tracks – High quality durable tracks for tough working conditions;

  • Track Chain - Links made of drop forged steel alloy and strutted to resist twisting and working stresses.
  • Track Shoes - Wide range of track shoe widths helps to match TD-40E Extra perfectly to all types of ground conditions.
  • Dressta Lubricated Track System (LTS)

Track Chain Guides and Track Roller Guards – Track chain guides are standard equipment and full length track roller guards are optional.

Suspension System – 3-point suspension system consisting of two pivot shafts and equaliser bar.


ENGINEERED FOR YOUR BUSINESS

Optimal power to weight ratio for unrivalled traction & drawbar pull…

The TD-40E XP sets the standards for others to follow and is a result of DRESSTA’s experience in designing highly efficient and productive Crawler Dozers.

Design concepts utilised in the TD-40E XP include, optimisation of weight distribution, modular construction, and use of a one-piece main frame, two-speed Steering Drive and a 3-point track mounting system. Optimal performance is achieved when machine weight is matched to power and the TD-40E XP provides a second-to-none balance of weight for traction and power for unrivalled drawbar pull.

 

Key Specifications

Driveline
Engine Manufacturer / Model / Tier Cummins/QSK 19/T2
Displacement 19 l 1,159.5 in3
Rated Speed 2100 RPM
Engine Output - Net 388 kW 520 hp
Rated Speed - Torque 1500 RPM
Engine Torque 2237 Nm 1,649.9 lb/ft
Transmission Type - Fwd Rev Speeds Powershift - 6/6
Carrier Rollers / Track Rollers 2/6
Shoe Pitch 280 mm 11.0 in
Track Shoe Width 610 mm 24.0 in
Ground Contact Area 44000 cm2 6,820.0 in2
Number of Shoes 39
Capacities
Fuel Tank 1362 l 359.8 Gal(US)
Hydraulic Tank 169 l 44.6 Gal(US)
Blade Capacity 18.6 m3 24.3 yd3
Dimensions
Height Top of ROPS (Max) 4220 mm 166.1 in
Width - Over Tracks 3110 mm 122.4 in
Track Length - On Ground 3610 mm 142.1 in
Blade Width 4810 mm 189.4 in
Performance
Speed Forward - Maximum 12 km/h 7.5 MPH
Speed Reverse - Maximum 14.9 km/h 9.3 MPH
Ground Bearing Pressure 151 kPa 21.9 psi
Drawbar Pull Maximum 1162 kN 261.2 lbf
Implement Pump Flow 398 l/min 14.1 cfm
Operating Weight
Operating Weight 67700 kg 149,252.8 lb

Features & Benefits

WORKING EQUIPMENT
Blades

  • Standard Semi-U Blade design combines the penetration ability of a straight blade with the increased capacity provided by short wings. It is used for heavy duty applications such as mining and road construction.
  • The Full-U Blade provides high volume movement of light non-cohesive materials such as coal and woodchips.
  • Coal Blade for excellent coal pile productivity. Its length, height, and wing angles were developed specifically for high production coal dozing. The blade pocket is in the right place to deliver a live, rolling load. Extended end plates help contain loads and eliminate side spillage.
BLADE SELECTION SEMI-U FULL-U COAL
UNDERCARRIAGE STD STD STD
BLADE CAPACITY
SAE J1265		 18.6 m3
(24.3 yd3)		 22.8 m3
(29.8 yd3)		 39.8 m3
(52.0 yd3)

Rippers
Adjustable parallelogram multi-shank ripper offers excellent 1000 mm (39”) penetration in extremely tough materials and can be used with up to 3 shanks adjusted to two vertical positions. The single shank ripper option offers a standard shank with 1290 mm (51”) penetration and a deep shank option with an exceptional 1670 mm (66”) penetration, allowing full use of the remarkable drawbar pull of the machine.


ENGINE
The TD-40E XP is powered by a diesel engine that delivers outstanding power & torque;

  • Heavy Duty Cummins QSK 19 litre Tier 2/EU Stage II Diesel Engine.
  • Direct injection, in-line, 6 cylinder, 4 stroke, turbocharged & Charge Air Cooled (CAC) engine developing 388 kW (520 hp) Net at rated engine speed of 2100 rpm
  •  


TRANSMISSION
Transmission system that automatically matches speed to load conditions for optimal push power, preventing driveline shock, multiplying the torque required while delivering 6 forward and 6 reverse speeds.

  • Torque Converter
  • 3-Speed Powershift Transmission
  • 2-Speed Steering Drive
  • Double reduction Final Drive

The modular design drivetrain incorporates the engine, torque converter, transmission, steering drive and final drives. Components can be easily removed & re-fitted without oil loss ensuring maximum machine uptime.


HYDRAULICS
A proven design multiple pump system & high capacity hydraulic reservoir for improved cooling. Hose & tube routings are accessible and yet well protected to prevent accidental damage. Trimble ready option is available on factory build orders.

Two-speed steering module on Dressta dozers maintains power to both tracks – at all times. You get the benefit of vastly improved traction to push loads effortlessly through turns, quickly and smoothly.


CAB - OPERATOR STATION & CONTROLS
Deluxe 6-sided ROPS / FOPS Cab with enlarged glass area provides a clear and direct line of sight to both the blade and ripper. The comfortable, sound-suppressed, pressurised cab is equipped with:

  • Efficient air recirculation system
  • Air conditioner & heater with multiple vents
  • Deluxe air suspension seat with adjustable arm rests. The seat swivels 14 degrees to the right for better ripper viewing
  • Ergonomically designed joystick controls for direction, blade and ripper operations.


ROBUST FRAME AND UNDERCARRIAGE
DRESSTA Mainframe and Track frame system ensures excellent machine balance for dozing, ripping, or final grading applications.

  • Mainframe – a one-piece weldment consisting of the front frame, rear frame, and equaliser bar. The rugged design of the mainframe absorbs impact shock loads and twisting forces to ensure a long life.
  • High quality sealed and lifetime lubricated track rollers
  • Heavy-duty idlers and track tensioners

Tracks – High quality durable tracks for tough working conditions;

  • Track Chain - Links made of drop forged steel alloy and strutted to resist twisting and working stresses.
  • Track Shoes - Wide range of track shoe widths helps to match TD-40E XP perfectly to all types of ground conditions.
  • Dressta Lubricated Track System (LTS)

Track Chain Guides and Track Roller Guards – Track chain guides are standard equipment and full length track roller guards are optional.

Suspension System – 3-point suspension system consisting of two pivot shafts and equaliser bar.


ENGINEERED FOR YOUR BUSINESS

Optimal power to weight ratio for unrivalled traction & drawbar pull…

The TD-40R Extra sets the standards for others to follow and is a result of DRESSTA’s experience in designing highly efficient and productive Crawler Dozers.

Design concepts utilised in the TD-40R Extra include, optimisation of weight distribution, modular construction, and use of a one-piece main frame, two-speed Steering Drive and a 3-point track mounting system. Optimal performance is achieved when machine weight is matched to power and the TD-40R Extra provides a second-to-none balance of weight for traction and power for unrivalled drawbar pull.

 

Key Specifications

Driveline
Engine Manufacturer / Model / Tier Perkins/C 18/T4F
Displacement 18 l 1,098.4 in3
Rated Speed 2000 RPM
Engine Output - Net 394 kW 528 hp
Rated Speed - Torque 1500 RPM
Engine Torque 2379 Nm 1,754.7 lb/ft
Transmission Type - Fwd Rev Speeds Powershift - 6/6
Carrier Rollers / Track Rollers 2/6
Shoe Pitch 280 mm 11.0 in
Track Shoe Width 610 mm 24.0 in
Ground Contact Area 44000 cm2 6,820.0 in2
Number of Shoes 39
Capacities
Fuel Tank 1270 l 335.5 Gal(US)
Hydraulic Tank 169 l 44.6 Gal(US)
Blade Capacity 18.6 m3 24.3 yd3
Dimensions
Height Top of ROPS (Max) 4220 mm 166.1 in
Width - Over Tracks 3110 mm 122.4 in
Track Length - On Ground 3610 mm 142.1 in
Blade Width 4810 mm 189.4 in
Performance
Speed Forward - Maximum 12 km/h 7.5 MPH
Speed Reverse - Maximum 14.9 km/h 9.3 MPH
Ground Bearing Pressure 151 kPa 21.9 psi
Drawbar Pull Maximum 1162 kN 261.2 lbf
Implement Pump Flow 398 l/min 14.1 cfm
Operating Weight
Operating Weight 67700 kg 149,252.8 lb

Features & Benefits

WORKING EQUIPMENT
Blades

  • Standard Semi-U Blade design combines the penetration ability of a straight blade with the increased capacity provided by short wings. It is used for heavy duty applications such as mining and road construction.
  • The Full-U Blade provides high volume movement of light non-cohesive materials such as coal and woodchips.
  • Coal Blade for excellent coal pile productivity. Its length, height, and wing angles were developed specifically for high production coal dozing. The blade pocket is in the right place to deliver a live, rolling load. Extended end plates help contain loads and eliminate side spillage.
BLADE SELECTION SEMI-U FULL-U COAL
UNDERCARRIAGE STD STD STD
BLADE CAPACITY
SAE J1265		 18.6 m3
(24.3 yd3)		 22.8 m3
(29.8 yd3)		 39.8 m3
(52.0 yd3)

Rippers
Adjustable parallelogram multi-shank ripper offers excellent 1000 mm (39”) penetration in extremely tough materials and can be used with up to 3 shanks adjusted to two vertical positions. The single shank ripper option offers a standard shank with 1290 mm (51”) penetration and a deep shank option with an exceptional 1670 mm (66”) penetration, allowing full use of the remarkable drawbar pull of the machine.


ENGINE
The TD-40R Extra is powered by a diesel engine that delivers outstanding power & torque;

  • Heavy Duty Perkins C 18 litre Tier 4 Final /EU Stage IV Diesel Engine.
  • Direct injection, in-line, 6 cylinder, 4 stroke, turbocharged & Charge Air Cooled (CAC) engine developing 394 kW (536 hp) Net at rated engine speed of 2000 rpm


TRANSMISSION
Transmission system that automatically matches speed to load conditions for optimal push power, preventing driveline shock, multiplying the torque required while delivering 6 forward and 6 reverse speeds.

  • Torque Converter
  • 3-Speed Powershift Transmission
  • 2-Speed Steering Drive
  • Double reduction Final Drive

The modular design drivetrain incorporates the engine, torque converter, transmission, steering drive and final drives. Components can be easily removed & re-fitted without oil loss ensuring maximum machine uptime.


HYDRAULICS
A proven design multiple pump system & high capacity hydraulic reservoir for improved cooling. Hose & tube routings are accessible and yet well protected to prevent accidental damage. Trimble ready option is available on factory build orders.

Two-speed steering module on Dressta dozers maintains power to both tracks – at all times. You get the benefit of vastly improved traction to push loads effortlessly through turns, quickly and smoothly.


CAB - OPERATOR STATION & CONTROLS
Deluxe 6-sided ROPS / FOPS Cab with enlarged glass area provides a clear and direct line of sight to both the blade and ripper. The comfortable, sound-suppressed, pressurised cab is equipped with:

  • Efficient air recirculation system
  • Air conditioner & heater with multiple vents
  • Deluxe air suspension seat with adjustable arm rests. The seat swivels 14 degrees to the right for better ripper viewing
  • Ergonomically designed joystick controls for direction, blade and ripper operations.


ROBUST FRAME AND UNDERCARRIAGE
DRESSTA Mainframe and Track frame system ensures excellent machine balance for dozing, ripping, or final grading applications.

  • Mainframe – a one-piece weldment consisting of the front frame, rear frame, and equaliser bar. The rugged design of the mainframe absorbs impact shock loads and twisting forces to ensure a long life.
  • High quality sealed and lifetime lubricated track rollers
  • Heavy-duty idlers and track tensioners

Tracks – High quality durable tracks for tough working conditions;

  • Track Chain - Links made of drop forged steel alloy and strutted to resist twisting and working stresses.
  • Track Shoes - Wide range of track shoe widths helps to match TD-40R Extra perfectly to all types of ground conditions.
  • Dressta Lubricated Track System (LTS)

Track Chain Guides and Track Roller Guards – Track chain guides are standard equipment and full length track roller guards are optional.

Suspension System – 3-point suspension system consisting of two pivot shafts and equaliser bar.


ENGINEERED FOR YOUR BUSINESS