change

Loaders & Dozers in Kyrgyzstan Extremes

Loaders & Dozers

in Kyrgyzstan Extremes

Loaders & Dozers

Dressta Wheel Loaders and Crawler Dozers withstood the unrelenting challenges of operating at altitude in Kyrgyzstan. This gold mining project required maximum reliability in extreme temperatures – the Dressta machines would cope with ease.

TD 25M Extra Kazakhstan2

TD 25M Extra Kazakhstan5

TD 25M Extra Kazakhstan6

TD 25M Extra Kazakhstan7

TD 25M Extra Kyrgyzstan2

TD 25M Extra Kyrgyzstan3

TD 25M Extra Kyrgyzstan5

TD 40E Extra Kyrgyzstan6

TD 40E Extra Kyrgyzstan5

TD 40E Extra Kyrgyzstan3

The isolated Jerooy gold mine in the north of the Kyrgyz Republic is located 60km from Talas City at between 3000-3600m.a.s.l. The challenges at this altitude would deter most from expedition, but with estimated gold reserves of 83.98t as of 2009, joint venture company Jerooyaltn took on the extreme conditions.

In doing so, Jerooyaltn required tough, reliable equipment, so employed a range of Dressta construction equipment to ensure a successful operation. 534E wheel loaders along with TD-25M and TD-40E crawler dozers were assigned to the project, with Dressta providing specialized versions to overcome the environment.

The machines arrived at the Jerooyaltn base, 1800m.a.s.l., before travelling 30km uphill to the eventual worksite via the only suitable connection road. Here, at 3800m.a.s.l., the machines were required to work night and day, through summer and winter, in temperatures that varied from +40°C to -35°C. The altitude exacerbates the unpredictability of the conditions, for example snow in summer, and temperature differences of as such as 30°C between worksite and base.

SUMMER & ARCTIC PACKAGE

Dressta specialized its wheel loaders and crawler dozers to be able to cope with the adverse weather and extreme temperature diversity. This was achieved by equipping the machines with an air conditioning system for summer and its ‘Arctic Package’ SFR for winter.

The Arctic Package was designed to protect both the machines and operators from the rigours of operating in sub-zero temperatures as low as -50°C. For the cab, double glazed windows, outer thermal protection of the engine compartment, tight side sheets, a regulated radiator louver and an Airtronic air heater ensured the operators were sufficiently warm.

For the machines themselves to retain their optimal performance levels, several heating systems were implemented for the fuel, oils and coolants, as well as a pre-heating system for the engine.

TOUGH GROUND, TOUGH BLADES

Tough climatic conditions were coupled with equally demanding ground conditions. The Dressta machines had to cope with exceptionally hard rock that attains 9-11 units in the 12-unit Protodiakonov scale.

To tear through the abrasive rock, the dozers were specified with reinforced blade systems, including blade plates and pusharm wear plates. Additionally, extreme-duty replaceable blade side cutters were used, enabling optimized dozer performance when cutting the hillside in the construction and building of essential service roads on side-slopes.

SIDE-SLOPE PERFORMANCE

The necessity to build these service roads often meant the machines and their operators were working on the edge of a several hundred-metre abyss. Such fine margins required optimal machine balance and stability with no room for error – an application that Dressta crawler dozers are renowned for.

Under such a severe climate, with high working site altitude and constant side-slope operation, the technical condition, reliability and serviceability had to be at 100% at all times. For this tough Kyrgyzstan gold mine project, the 534E, TD-25M and TD-40E Dressta machines assigned by Jerooyaltn were essential in achieving safe, efficient and productive operations.

 

Available Models

E Series wheel loader featuring a powerful CUMMINS QSC 8.3L engine with a turbocharger and CAC. Superb manoeuvrability and a high breakout force, reach and lift to ensure productive cycle times and agile performance.

 

Key Specifications

Driveline
EngineManufacturerModelTier Cummins/QSC 8.3/T3
Displacement 8.3 l 506.5 in3
RatedSpeed 2200 RPM
EngineOutputNet 169 kW 227 hp
RatedSpeedTorque 1500 RPM
EngineTorque 1085 Nm 800.3 lb/ft
TransmissionTypeFwdRevSpeeds Dressta /Powershift
NumberOfRanges 4
TyreSize 23.5 x 25
ServiceBrakeTypeLocation All Wheels/ Dry disc
Capacities
FuelTank 350 l 92.5 Gal(US)
HydraulicTank 230 l 60.8 Gal(US)
HeapedCapacity 3.4 m3 4.4 3
Dimensions
HeightOverCab 3650 mm 143.7 in
WidthOverTyres 2690 mm 105.9 in
ShovelWidth 2800 mm 110.2 in
FullLiftDumpHeight 3095 mm 121.9 in
FullLiftReach 1063 mm 41.9 in
LoaderArmTypeGeometry Double Arm/Parallel
DumpAngleAtDump 45 mm 1.8 in
TurningRadiusOverShovel 6917 mm 272.3 in
Performance
StraightTippingLoad 17320 kg 38,184.0 lb
FullTurnTippingLoad 14895 kg 32,837.8 lb
SpeedForwardMaximum 42.4 km/h 26.3 MPH
BreakoutShovel 13867.6 kgf 8,616.9 lbf
OscillationRearAxle 26°
Operating Weight
OperatingWeight 20700 kg 45,635.6 lb

Features & Benefits

DRESSTA 534E is a mid-size Wheel Loader of the range. Short V-cycles greatly improve the productivity of the DRESSTA Wheel Loaders, resulting in a lower m3 / hr cost for the material that is being moved.

Due to its excellent and robust design DRESSTA Wheel Loaders offers a high tipping load combined with a strong lifting performance, making light work of heavy loads. This versatility helps reduce the operational cost.

The QSC Advanced Technology improves engine performance whilst providing greater torque, and with the combination of electronic controls and a durable block design, it consistently functions at a high standard in even the toughest working conditions. At the same time dramatically lowering fuel usage.

The machine’s operator is allowed excellent visibility around all sides of the vehicle, and the loaders are equipped with ROPS/FOPS to protect the operator in the rare case of the vehicle rolling. DRESSTA equips its machines with ergonomic controls and state-of-the-art monitoring systems reduce the effort required to achieve optimal operability. Excellent visibility provided on the units allow operators to complete their jobs faster in a safe environment.

Easy maintenance and long service intervals ensures the machine uptime is maximised, making sure operational cost per hour are kept to a minimum.

Optimal power to weight ratio for unrivalled traction & drawbar pull…

The TD-25M Extra sets the standards for others to follow and is a result of DRESSTA’s experience in designing highly efficient and productive Crawler Dozers.

Design concepts utilised in the TD-25M Extra include, optimisation of weight distribution, modular construction, and use of a one-piece main frame, two-speed Steering Drive and a 3-point track mounting system. Optimal performance is achieved when machine weight is matched to power and the TD-25M Extra provides a second-to-none balance of weight for traction and power for unrivalled drawbar pull.

 

Key Specifications

Driveline
EngineManufacturerModelTier Cummins/QSX 15/T3
Displacement 15 l 915.4 in3
RatedSpeed 1800 RPM
EngineOutputNet 280 kW 375 hp
RatedSpeedTorque 1400 RPM
EngineTorque 1825 Nm 1,346.1 lb/ft
TransmissionTypeFwdRevSpeeds Powershift - 6/6
CarrierRollersTrackRollers 2/6
ShoePitch 250 mm 9.8 in
TrackShoeWidth 560 mm 22.0 in
GroundContactArea 35000 cm2 5,425.0 in2
NumberOfShoes 38
Capacities
FuelTank 825 l 217.9 Gal(US)
HydraulicTank 130 l 34.3 Gal(US)
BladeCapacity 9.6 m3 12.6 yd3
Dimensions
HeightTopOfROPSMax 3800 mm 149.6 in
WidthOverTracks 2700 mm 106.3 in
TrackLengthOnGround 3150 mm 124.0 in
BladeWidth 4050 mm 159.4 in
Performance
SpeedForwardMaximum 10.3 km/h 6.4 MPH
SpeedReverseMaximum 12.3 km/h 7.6 MPH
GroundBearingPressure 116 kPa 16.8 psi
DrawbarPullMaximum 793 kN 178.3 lbf
ImplementPumpFlow 313.5 l/min 11.1 cfm
Operating Weight
OperatingWeight 41500 kg 91,491.7 lb

Features & Benefits

WORKING EQUIPMENT
Blades

  • Standard Semi-U Blade design combines the penetration ability of a straight blade with the increased capacity provided by short wings. It is used for heavy duty applications such as mining and road construction.
  • The Full-U Blade provides high volume movement of light non-cohesive materials such as coal and woodchips.
  • Angle Blade with tilt is ideal for side casting, backfilling, cutting ditches or setting a final grade by reducing the amount of manoeuvering required to do these jobs.
  • Coal Blade for excellent coal pile productivity. Its length, height, and wing angles were developed specifically for high production coal dozing. The blade pocket is in the right place to deliver a live, rolling load. Extended end plates help contain loads and eliminate side spillage.
BLADE SELECTION SEMI-U FULL-U ANGLE COAL
UNDERCARRIAGE STD STD STD STD
BLADE CAPACITY
SAE J1265
9.6 m3
(12.5 yd3)
11.5 m3
(15.0 yd3)
5.7 m3
(7.4 yd3)
21.0 m3
(27.5 yd3)

Rippers
Adjustable parallelogram multi-shank ripper offers excellent 868 mm (34.2”) penetration in extremely tough materials and can be used with up to 3 shanks adjusted to two vertical positions. The single shank ripper option offers a standard shank with 1250 mm (49.2”) penetration and a deep shank option with an exceptional 1700 mm (66.9”) penetration, allowing full use of the remarkable drawbar pull of the machine.


ENGINE
The TD-25M Extra is powered by a diesel engine that delivers outstanding power & torque;

  • Heavy Duty Cummins QSX 15 litre Tier 3 /EU Stage IIIA Diesel Engine.
  • Direct injection, in-line, 6 cylinder, 4 stroke, turbocharged & Charge Air Cooled (CAC) engine developing 280 kW (375 hp) Net at rated engine speed of 2000 rpm


TRANSMISSION
Transmission system that automatically matches speed to load conditions for optimal push power, preventing driveline shock, multiplying the torque required while delivering 6 forward and 6 reverse speeds.

  • Torque Converter
  • 3-Speed Powershift Transmission
  • 2-Speed Steering Drive
  • Double reduction Final Drive

The modular design drivetrain incorporates the engine, torque converter, transmission, steering drive and final drives. Components can be easily removed & re-fitted without oil loss ensuring maximum machine uptime.


HYDRAULICS
A proven design multiple pump system & high capacity hydraulic reservoir for improved cooling. Hose & tube routings are accessible and yet well protected to prevent accidental damage. Trimble ready option is available on factory build orders.

Two-speed steering module on Dressta dozers maintains power to both tracks – at all times. You get the benefit of vastly improved traction to push loads effortlessly through turns, quickly and smoothly.


CAB - OPERATOR STATION & CONTROLS
Deluxe 6-sided ROPS / FOPS Cab with enlarged glass area provides a clear and direct line of sight to both the blade and ripper. The comfortable, sound-suppressed, pressurised cab is equipped with:

  • Efficient air recirculation system
  • Air conditioner & heater with multiple vents
  • Deluxe air suspension seat with adjustable arm rests. The seat swivels 14 degrees to the right for better ripper viewing
  • Ergonomically designed joystick controls for direction, blade and ripper operations.


ROBUST FRAME AND UNDERCARRIAGE
DRESSTA Mainframe and Track frame system ensures excellent machine balance for dozing, ripping, or final grading applications.

  • Mainframe – a one-piece weldment consisting of the front frame, rear frame, and equaliser bar. The rugged design of the mainframe absorbs impact shock loads and twisting forces to ensure a long life.
  • High quality sealed and lifetime lubricated track rollers
  • Heavy-duty idlers and track tensioners

Tracks – High quality durable tracks for tough working conditions;

  • Track Chain - Links made of drop forged steel alloy and strutted to resist twisting and working stresses.
  • Track Shoes - Wide range of track shoe widths helps to match TD-25M Extra perfectly to all types of ground conditions.
  • Dressta Lubricated Track System (LTS)

Track Chain Guides and Track Roller Guards – Track chain guides are standard equipment and full length track roller guards are optional.

Suspension System – 3-point suspension system consisting of two pivot shafts and equaliser bar.

Optimal power to weight ratio for unrivalled traction & drawbar pull…

The TD-40E Extra sets the standards for others to follow and is a result of DRESSTA’s experience in designing highly efficient and productive Crawler Dozers.

Design concepts utilised in the TD-40E Extra include, optimisation of weight distribution, modular construction, and use of a one-piece main frame, two-speed Steering Drive and a 3-point track mounting system. Optimal performance is achieved when machine weight is matched to power and the TD-40E Extra provides a second-to-none balance of weight for traction and power for unrivalled drawbar pull.

 

Key Specifications

Driveline
EngineManufacturerModelTier Cummins/QSK 19/T3
Displacement 19 l 1,159.5 in3
RatedSpeed 2000 RPM
EngineOutputNet 384 kW 515 hp
RatedSpeedTorque 1500 RPM
EngineTorque 2379 Nm 1,754.7 lb/ft
TransmissionTypeFwdRevSpeeds Powershift - 6/6
CarrierRollersTrackRollers 2/6
ShoePitch 280 mm 11.0 in
TrackShoeWidth 610 mm 24.0 in
GroundContactArea 44000 cm2 6,820.0 in2
NumberOfShoes 39
Capacities
FuelTank 1362 l 359.8 Gal(US)
HydraulicTank 169 l 44.6 Gal(US)
BladeCapacity 18.6 m3 24.3 yd3
Dimensions
HeightTopOfROPSMax 4220 mm 166.1 in
WidthOverTracks 3110 mm 122.4 in
TrackLengthOnGround 3610 mm 142.1 in
BladeWidth 4810 mm 189.4 in
Performance
SpeedForwardMaximum 12 km/h 7.5 MPH
SpeedReverseMaximum 14.9 km/h 9.3 MPH
GroundBearingPressure 151 kPa 21.9 psi
DrawbarPullMaximum 1162 kN 261.2 lbf
ImplementPumpFlow 398 l/min 14.1 cfm
Operating Weight
OperatingWeight 67700 kg 149,252.8 lb

Features & Benefits

WORKING EQUIPMENT
Blades

  • Standard Semi-U Blade design combines the penetration ability of a straight blade with the increased capacity provided by short wings. It is used for heavy duty applications such as mining and road construction.
  • The Full-U Blade provides high volume movement of light non-cohesive materials such as coal and woodchips.
  • Coal Blade for excellent coal pile productivity. Its length, height, and wing angles were developed specifically for high production coal dozing. The blade pocket is in the right place to deliver a live, rolling load. Extended end plates help contain loads and eliminate side spillage.
BLADE SELECTION SEMI-U FULL-U COAL
UNDERCARRIAGE STD STD STD
BLADE CAPACITY
SAE J1265
18.6 m3
(24.3 yd3)
22.8 m3
(29.8 yd3)
39.8 m3
(52.0 yd3)

Rippers
Adjustable parallelogram multi-shank ripper offers excellent 1000 mm (39”) penetration in extremely tough materials and can be used with up to 3 shanks adjusted to two vertical positions. The single shank ripper option offers a standard shank with 1290 mm (51”) penetration and a deep shank option with an exceptional 1670 mm (66”) penetration, allowing full use of the remarkable drawbar pull of the machine.


ENGINE
The TD-40E Extra is powered by a diesel engine that delivers outstanding power & torque;

  • Heavy Duty Cummins QSK 19 liter Tier 3 /EU Stage IIIA Diesel Engine.
  • Direct injection, in-line, 6 cylinder, 4 stroke, turbocharged & Charge Air Cooled (CAC) engine developing 384 kW (515 hp) Net at rated engine speed of 2000 rpm 


TRANSMISSION
Transmission system that automatically matches speed to load conditions for optimal push power, preventing driveline shock, multiplying the torque required while delivering 6 forward and 6 reverse speeds.

  • Torque Converter
  • 3-Speed Powershift Transmission
  • 2-Speed Steering Drive
  • Double reduction Final Drive

The modular design drivetrain incorporates the engine, torque converter, transmission, steering drive and final drives. Components can be easily removed & re-fitted without oil loss ensuring maximum machine uptime.


HYDRAULICS
A proven design multiple pump system & high capacity hydraulic reservoir for improved cooling. Hose & tube routings are accessible and yet well protected to prevent accidental damage. Trimble ready option is available on factory build orders.

Two-speed steering module on Dressta dozers maintains power to both tracks – at all times. You get the benefit of vastly improved traction to push loads effortlessly through turns, quickly and smoothly.


CAB - OPERATOR STATION & CONTROLS
Deluxe 6-sided ROPS / FOPS Cab with enlarged glass area provides a clear and direct line of sight to both the blade and ripper. The comfortable, sound-suppressed, pressurised cab is equipped with:

  • Efficient air recirculation system
  • Air conditioner & heater with multiple vents
  • Deluxe air suspension seat with adjustable arm rests. The seat swivels 14 degrees to the right for better ripper viewing
  • Ergonomically designed joystick controls for direction, blade and ripper operations.


ROBUST FRAME AND UNDERCARRIAGE
DRESSTA Mainframe and Track frame system ensures excellent machine balance for dozing, ripping, or final grading applications.

  • Mainframe – a one-piece weldment consisting of the front frame, rear frame, and equaliser bar. The rugged design of the mainframe absorbs impact shock loads and twisting forces to ensure a long life.
  • High quality sealed and lifetime lubricated track rollers
  • Heavy-duty idlers and track tensioners

Tracks – High quality durable tracks for tough working conditions;

  • Track Chain - Links made of drop forged steel alloy and strutted to resist twisting and working stresses.
  • Track Shoes - Wide range of track shoe widths helps to match TD-40E Extra perfectly to all types of ground conditions.
  • Dressta Lubricated Track System (LTS)

Track Chain Guides and Track Roller Guards – Track chain guides are standard equipment and full length track roller guards are optional.

Suspension System – 3-point suspension system consisting of two pivot shafts and equaliser bar.