CRAWLER DOZER

TD-25M

ENGINE

CCEC - QSNT-C375S30

POWER

246 kW (330 hp)

OPERATING WEIGHT

40 t

BLADE CAPACITY

9,6 m3

NOTHING STANDS IN ITS WAY

When it comes to operational performance, nothing stands in the way of the New TD-25M.

In the mine, in the quarry, on the road site or in any heavy weight application, the superior pushing power and control of the New TD-25M sets this dozer apart. Climb into the cab, experience the power and you’ll know you’ve made the right choice.

PUSHING THE LIMITS TO PUT YOU FIRST

With the New TD-25M we set ourselves the challenge to deliver the ultimate operator experience. A superior, safe and comfortable cab designed for easy operation. High visibility, easy access maintenance, but above all, the real power and flexibility you need to push, rip and grade again and again

The TD-25M In Operation

Watch our final film of the TD-25M in operation and what the experts had to say about it.

ENHANCED VISIBILITY
When you see more you can do more. With 33% more glass surface area, a tapered engine hood presenting clear sightlines to the blade corners, a rear view camera, and additional ripper lighting, you’ve got the job covered from every angle.
CLASS LEADING DRAWBAR POWER
With 794 kN of drawbar pull, you’ve got all the pulling power you’ll need, delivered through the perfect combination of a 3-speed power shift transmission and 2-speed steering drive.
PERFECT POWER TURNS
Our unique 2-speed steering drive maximises productivity by delivering 100% of the engine’s power to both tracks, allowing you to push a full load through turns with near perfect load retention.
UNDERCARRIAGE FLEXIBILITY
Interchangeable Track shoes from 560 mm (22 in) LT UC for Harder ground applications to 762 mm (30 in) LGP UC for much better stability on soft ground works
YOUR CHOICE OF WEAPON
Whatever you need, whenever you need it, we offer you an awesome arsenal of blades including a Semi-U blade, Full-U blade, Coal blade and Angle blade. When it comes to rippers, you’ve got a choice of single-shank or multi-shank.
FASTER CYCLE TIMES
With improved blade control for increased productivity, the Ripper Auto Rise function works to shorten cycle times thanks to the efficient load sensing system.
YOUR CHOICE OF TRACKS
We have the right tracks for every application. Our single grouser track shoes available in 560/610/660/711mm are perfect for standard or heavy duty applications. In addition, we offer self-cleaning tracks for landfill applications.
THE LOWEST TOTAL COST OF OWNERSHIP
We’ve gone further to protect your investment and deliver the lowest cost of ownership. Easy, safe, fast access to maintenance points reduce down time. Lifetime lubricated rollers, heavy duty chains and idlers for extended track life all combine to reduce maintenance costs. Our intelligent, modular component layout makes servicing and maintenance even easier.

BUILT WITH THE BEST OPERATORS IN MIND

ENHANCED VISIBILITY

When you see more you can do more. With 33% more glass surface area, a tapered engine hood presenting clear sightlines to the blade corners, a rear view camera, and additional ripper lighting, you’ve got the job covered from every angle.

CLASS LEADING DRAWBAR POWER

With 794 kN of drawbar pull, you’ve got all the pulling power you’ll need, delivered through the perfect combination of a 3-speed power shift transmission and 2-speed steering drive.

PERFECT POWER TURNS

Our unique 2-speed steering drive maximises productivity by delivering 100% of the engine’s power to both tracks, allowing you to push a full load through turns with near perfect load retention.

TOTAL MOTION CONTROL

With travel speed pre-selection and automatic down shifting mode, we’ve made it even easier for you to move more material with greater efficiency.

YOUR CHOICE OF WEAPON

Whatever you need, whenever you need it, we offer you an awesome arsenal of
blades including a Semi-U blade, Full-U blade, Coal blade and Angle blade. When it comes to rippers, you’ve got a choice of single-shank or multi-shank.

FASTER CYCLE TIMES

With improved blade control for increased productivity, the Ripper Auto Rise function works to shorten cycle times thanks to the efficient load sensing system.

YOUR CHOICE OF TRACKS

We have the right tracks for every application. Our single grouser track shoes available in 560/610/660/711mm are perfect for standard or heavy duty applications. In addition, we offer self-cleaning tracks for landfill applications.

THE LOWEST TOTAL COST OF OWNERSHIP

We’ve gone further to protect your investment and deliver the lowest cost of ownership. Easy, safe, fast access to maintenance points reduce down time. Lifetime lubricated rollers, heavy duty chains and idlers for extended track life all combine to reduce maintenance costs. Our intelligent, modular component layout makes servicing and maintenance even easier.

AWESOME POWER

Large scale applications such as mining and quarrying demand serious performance in the power department. The New TD-25M takes power to a new level.

ENGINE POWER 330 hp 
DRAWBAR PULL 665 kN

THE POWER WITHIN
At the heart of this awesome dozer beats a turbocharged CCEC QSNT-C375S30, 280 kW (375 hp) in-line engine, compliant to EPA Tier 3/EU Stage IIIA emissions regulations. The combination of DRESSTA expertise with the latest heavy-duty diesel design delivers higher peak torque and exceptional fuel efficiency, giving you the confidence to take on the toughest jobs without breaking a sweat.
FLAWLESS POWER MANAGEMENT
High productivity is about consistently achieving marginal gains. It’s about saving a second here or reducing a pass there. Our unique 2-speed steering drive achieves both, saving time and effort. It’s dual path transmission maximises productivity by delivering 100% of the engine’s power to both tracks, allowing you to push a full load through turns without losing material. Less time. Less passes. More productivity per hour.
PUSH IT. RIP IT. MOVE IT.
794 kN of drawbar pull puts the TD-25M in a class of its own. With this power in your hands you’ve got all the dozing power you’ll need to push, rip and move anything that stands in your way. Delivered through the perfect combination of a 3-speed power shift transmission and 2-speed steering drive, nothing’s going to stop you.
CHOOSE THEN CRUISE
Working within the optimum engine RPM is a breeze with the TD-25M. Simply select your maximum desired ground speed for your application and leave the rest to the sophisticated power management system. It will keep you within the sweet spot of engine RPM, saving you fuel and effort.
COOLING POWER
No matter how hard you push it, the New TD-25M will always keep its cool thanks to its hyper efficient cooling system with Charge Air Cooler and a variable speed hydrostatic cooling fan. The modular design of the radiator, aftercooler, driveline and hydraulic oil coolers also ensure that the system is easy to access and maintain.
FASTER, MORE EFFICIENT CYCLE TIMES WITH PRE-SET MODES
With a choice of two pre-set modes we make it easy to improve cycle times, save fuel and keep fresh and focused by reducing repetitive gear changing. Simply choose the mode to match your task and relax.

COMMAND AND CONTROL

Awesome power is one thing, how you use it is another. We’ve made it easy for you to harness the awesome power of the New TD-25M to get the most out of every push, every pass and every shift.

WORK SMARTER NOT HARDER
At the heart of this awesome dozer beats a turbocharged CCEC QSNT-C375S30, 280 kW (375 hp) in-line engine, compliant to EPA Tier 3/EU Stage IIIA emissions regulations. The combination of DRESSTA expertise with the latest heavy-duty diesel design delivers higher peak torque and exceptional fuel efficiency, giving you the confidence to take on the toughest jobs without breaking a sweat.
CHOOSE YOUR SPEED
High productivity is about consistently achieving marginal gains. It’s about saving a second here or reducing a pass there. Our unique 2-speed steering drive achieves both, saving time and effort. It’s dual path transmission maximises productivity by delivering 100% of the engine’s power to both tracks, allowing you to push a full load through turns without losing material. Less time. Less passes. More productivity per hour.
REDUCE FUEL CONSUMPTION BY 5%
794 kN of drawbar pull puts the TD-25M in a class of its own. With this power in your hands you’ve got all the dozing power you’ll need to push, rip and move anything that stands in your way. Delivered through the perfect combination of a 3-speed power shift transmission and 2-speed steering drive, nothing’s going to stop you.
CONNECTED SUPER HIGHWAY
Working within the optimum engine RPM is a breeze with the TD-25M. Simply select your maximum desired ground speed for your application and leave the rest to the sophisticated power management system. It will keep you within the sweet spot of engine RPM, saving you fuel and effort.

RIP IT UP AND START AGAIN

With a choice of single-shank or multi-shank ripper options available, you’ve got the perfect ripper for any application whether it’s general construction, road building, mining or site clearing. Versatility is the name and Dressta have it covered.

RIP DOWN TO 1,250mm
665 kN DRAWBAR PULL

MULTIPLE ATTACK
Our multi-shank ripper is perfect for breaking through the top surface in softer ground conditions such as top soil, sand or clay. With the added benefit of hydraulic pitch adjustment, they can rip to a width of  1250mm and depth of 915 mm covering more ground in fewer passes
DRESSTA TOUGHNESS
ou can have 100% confidence in the strength and durability of our ripper shanks because they are Dressta through to their core. Built to exacting standards for durability from the toughest tungsten-steel alloys, our rippers can take some beating.
RIP IT DEEP
For breaking rock, concrete, hard packed or frozen soil you need the tough, concentrated and penetrating force that our single-shank rippers deliver. Our standard shank penetrates to 1,250mm but for a deeper cut, choose the deep shank option. With 1,250mm penetration and fully utilising the 665 kN of drawbar pull force, our rippers have the power to rip through the toughest jobs with speed and efficiency. For ease of operation, a hydraulically controlled ripper shank pin puller allows you to adjust ripper penetration depth from the cab.
SET IT AND LET IT RIP
Both the single-shank and multi-shank rippers are equipped with four large cylinders, two for pitching and two for raising and lowering. The angle of attack for the ripper shank can be changed with ease to match the ripping conditions.
Our adjustable parallelogram multi-shank ripper also offers excellent 760mm penetration. It can be angled on-the-go to help boost your productivity. Choose, set, and let rip!

ALWAYS MAKES THE CUT

Our blades have been designed to match the needs of two polar extremes - fine, light dozing and aggressive heavy material movement. The result is arguably the most versatile and high-performance blade range in the industry.

BLADE CAPACITY UP TO... 9,6m3

HIGHER VOLUME
When even higher volume is required for moving light, non-cohesive materials, our Full-U blade will always make the cut with a massive 9,6 m³ capacity providing the perfect solution for light materials such as sand, gravel, and coke.
SIZE MATTERS
For blades, size equals productivity. Our standard Semi-U blade, for example, is one of the largest blades in its class with a 9.6m³ capacity. Our standard Semi-U blade may be big, but it combines the penetration ability of a straight blade with its increased capacity making it the ideal choice for heavy duty applications like mining and road construction. When speed and efficiency are everything, our blades are a cut above the rest.
ANGLE BLADE
The Angle blade is designed for all dozing applications, including side casting. Our 5.7m³ precision Angle blade with 25% travel on each side works best handling broken and granular materials such as soils and gravel. The moldboard pivots on its center point to cast materials left or right. Ideal for making windrows, digging drainage ditches, backfilling trenches and grading roads
GET THE EDGE
All of our blades have been designed for increased capacity and incorporate full width cutting edges for performance and durability. Our blades can also be equipped with a hydraulic tilt or tilt/pitch option and a manual blade pitch adjustment which makes the dozer even more versatile and increases your return on investment.

EASY DOES IT

We think your job is tough enough, which is why our cab has been designed to let you work with ease and comfort. It’s a real home from home with loads of space and even a little luxury designed in as standard.

EASY TO SEE

When you can see more – you can do more. With 33% more glass surface area, a tapered engine hood presenting clear sightlines to the blade corners, a rear-view camera, and additional ripper lighting, it’s easy to see how the TD-25M offers the very best all-round visibility. But there’s more, we’ve lowered the side window position to improve visibility of tracks and the working area.

No matter which way you look, when it comes to improved visibility, you’ve got thejobsite covered from every angle. Lowered side windows, larger surface glass area and an angled seat for comfortable line of sight to the ripper.

EASY CHAIR

We’ve taken the concept of your favourite easy chair and “industrialised” it to create one of our best seats yet. The all new air-suspended high back seat comes with head rest, empty seat sensor and belt sensor to increase operator safety. It automatically adjusts to your weight and sitting position and now is equipped with fully adjustable arm rests (Up/Down & Forward / Reverse). It is angled to the right-hand side by 15 degrees to help you to stay fresh and alert on those long ripping runs.

EASY OPERATION

As you would expect, we have radically improved the operator’s interface too. Our new cab layout features new, ergonomic joysticks for finger-tip control, high visibility LCD in-cab displays allowing you to easily monitor of the machine’s vital data as it happens. We’ve built in a wealth of operational presets to make it even easier to adjust hydraulics, set blade and travel speed and work more productively plus we’ve added Bluetooth connectivity for your own personal devices.

EASY TO FIND YOUR PERFECT TEMPERATURE
No matter whether the sun’s beating down or the snow’s piling up, we’ve made it easy for you to find your perfect working temperature. Our improved climate control system featuring an easy to set control panel and 9 air outlets gives you total control of the elements.
EASY TO STAY SAFE AND SECURE
With wider doors for easy access and a more spacious cab with generous headroom, we’ve made it easy to avoid those slip and trip hazards which account for so many accidents these days. But we’ve gone further. Our cab is fully ROPS & FOPS protected and fully pressurized to reduce incab noise levels to 78 dB(A), reduce vibration and eliminate dust contamination.

MINING & QUARRYING EXPERTISE

Our mining and quarrying heritage speaks for itself. From an icy 40°C below zero to a searing 60°C, you’ve got to be able to trust your machine to work hard and keep on going. Our machines are designed to do just that – to keep working harder, for longer.

TRUST OUR PERFORMANCE

When it comes to power, the TD-25M delivers more in mining and quarrying applications with best-in-class drawbar pull. Optimally sized for performance, it is equipped with high weight-to-horsepower ratios for effective and efficient pushing of heavy-weight loads. Our unique 2-speed steering drive provides continuous transfer of 100% engine power to both tracks, increasing productivity in curve-line pushing.

SPECIALIST BLADES AND RIPPERS

Whatever the challenge, we have the blade. Our 9.6m³ Semi-U blade makes heavy cutting and pushing rocks and rocky clay easy. For high volume pushing of light non-cohesive materials, our 11.5m³ Full-U blade is the perfect solution. Our specialist 21m³ high-capacity Coal Handling blade is perfect for coal dozing and for moving bulky, low-density materials with length, height, and wing angles all developed to deliver maximum productivity.

Ripping through tough rocks, hard coal and heavy clay is a simple job for our single-shank ripper. Perfect for mining and quarrying you can choose standard or deep ripper shanks with hydraulic pitch if required.

HEAVY DUTY UNDERCARRIAGE

No matter how demanding the environment, you can trust the TD-25M. With a massive one-piece frame, high strength pivot shaft and exclusive undercarriage design, this awesome machine delivers maximum durability and peace-of-mind while giving the operator a smooth, stable ride with impressive slope stability. The undercarriage components are designed for extended wear in tough terrain and are arranged in a way that makes removal and replacement during servicing quick and easy, maximizing machine uptime and profitability.

THE PERFECT CAB CONDITIONS
To cope with the extreme dust and debris of quarrying and mining applications, we’ve equipped the TD-25M with a heavy-duty air filtering system. This industry leading cab and engine air filtering system ensures the highest quality air intake for the engine and cab, prolonging engine life and performance and creating a safer, more comfortable operator environment.

AT YOUR SERVICE 24/7

We are with you round-the-clock to ensure our machines meet the challenges of the toughest jobs.

COMPREHENSIVE WARRANTY

When you purchase our machines, your
investment is backed by one of the most
comprehensive warranties in the industry. In addition to the standard 12-month warranty, we offer an extended warranty protection program for the ultimate peace of mind. Toughest jobs without breaking a sweat.

FAST AND EASY PARTS SUPPLY

Genuine Dressta parts are engineered to fit right the first time and to provide the highest levels of performance and reliability while meeting strict quality controls. The global parts network, with seven regional distribution centers and advanced logistics systems, means you can be assured of rapid parts supply for whatever you need, wherever you are.

QUALITY YOU CAN TRUST

Our stringent quality assurance ensures all products meet your exact needs. Technical support teams offer fast access to factory expertise and information systems while ongoing aftersales support is available via dealerships with factory trained engineers who are available as and when you require.

AVAILABLE MODELS

TD-25M (EU Stage IIIA)

KEY SPECIFICATIONS

At Dressta we take pride in innovating to help our customers to achieve more in the jobs they do. Our dedicated team of application engineers can customize designs, modify standard equipment and adapt attachments for peak performance in specific application tasks, improving productivity and bottom line results.

Driveline

Engine Manufacturer / Model / Tier
CCEC QSNT-C375S30  EPA Tier 3/EU Stage IIIA
Displacement
14 l (854 in3)
Rated Speed
2000 RPM
Engine Output - Gross
- Net
280 kW (375 hp)
246 kW (330 hp)
Engine Torque
1825 Nm (1346 lb-ft) @ 1400 rpm
Track rollers, each side
7
Track Shoe Width
560 mm (22 in)
Ground Contact Area
36334 cm2 (5633,33 sq. in.)
Number of Shoes
42

Dimensions

Overall height - FOPS cab
3 750 mm (12 ft. 3 in.)
Ground Clearance
575 mm (22.6 in.)
Width - Over Tracks
2 800 mm (8 ft. 2 in.)
Track Length - On Ground
3 245 mm (10 ft. 7 in.)
Blade Width
4 050 mm (13 ft. 3 in.)
Overall Length
5 053 mm (16 ft. 6 in.)

Performance

Speed Forward - Maximum
11.0 km/h (6.8mph)
Speed Reverse - Maximum
13.3 km/h (8.3 mph)
Ground Bearing Pressure
94,7 kPa (13.7 psi)
Drawbar Pull Maximum
665 kN (149,498 lbf)
Implement Pump Flow
190 + 140 l/min (50 + 37 gpm

Operating Weight

Operating Weight
40 000 kg (88,184 lb)

Dressta TD-25M Brochure

download

KEY SPECIFICATIONS

At Dressta we take pride in innovating to help our customers to achieve more in the jobs they do. Our dedicated team of application engineers can customize designs, modify standard equipment and adapt attachments for peak performance in specific application tasks, improving productivity and bottom line results.

Driveline

Engine Manufacturer / Model / Tier
Cummins X15
EPA Tier 4f/EU Stage V
Displacement
15 l (912 in3)
Rated Speed
2000 RPM
Engine Output - Net
277 kW (370 hp)
246 kW (330 hp)
Engine Torque
2169 Nm (1600 lb-ft) @ 1200 rpm
Track rollers, each side
7
Track Shoe Width
560 mm (22 in)
Ground Contact Area
36 600 cm2 (5,673 sq. in)
Number of Shoes
39

Dimensions

Overall height - FOPS cab
3 743 mm (12 ft. 3 in.)
Ground Clearance
576 mm (22.6 in.)
Width - Over Tracks
2 700 mm (8 ft. 10 in.)
Track Length - On Ground
3 150 mm (10 ft. 4 in.)
Blade Width
4 050 mm (13 ft. 3 in.)
4 350 mm (14 ft. 3 in.)
4 950 mm (16 ft. 3 in.)
5 610 mm (18 ft. 5 in.)
Overall Length
5 070 mm (16 ft. 7 in.)

Performance

Speed Forward - Maximum
10.3 km/h (6.4 mph)
Speed Reverse - Maximum
12.3 km/h (7.6 mph)
Ground Bearing Pressure
98.6 kPa (14.3 psi)
Drawbar Pull Maximum
794 kN (178,498 lbf)
Implement Pump Flow
190 + 140 l/min (50 + 37 gpm

Operating Weight

Operating Weight
41 650 kg (91,820 lb

Dressta TD-25M Brochure

download
LiuGong Dressta Machinery Sp. z o.o.
COP 15, 37-450 Stalowa Wola
Phone: +48 501 802 802
Email: info@dressta.com
© 2023 LiuGong Dressta Machinery
Call Now Button linkedin facebook pinterest youtube rss twitter instagram facebook-blank rss-blank linkedin-blank pinterest youtube twitter instagram